lkml.org 
[lkml]   [2016]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] arm: dts: DRA7: Add DSPEVE thermal data
Date
This patch changes a dtsi file to contain the thermal data
for DSPEVE domain. This data will enable a thermal shutdown at 125C.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 arch/arm/boot/dts/dra7-dspeve-thermal.dtsi

diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
new file mode 100644
index 0000000..1c39a84
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for DRA7x SoC DSPEVE thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+dspeve_thermal: dspeve_thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <500>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&bandgap 3>;
+
+ trips {
+ dspeve_crit: dspeve_crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+};
--
1.9.1
\
 
 \ /
  Last update: 2016-02-08 11:01    [W:0.092 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site