lkml.org 
[lkml]   [2016]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] net: fec: Add "phy-reset-active-low" property to DT
On Mon, Feb 08, 2016 at 09:21:13PM +0100, Bernhard Walle wrote:
> We need that for a custom hardware that needs the reverse reset
> sequence.
>
> Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
> ---
> Documentation/devicetree/bindings/net/fsl-fec.txt | 3 +++
> drivers/net/ethernet/freescale/fec_main.c | 8 ++++++--
> 2 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
> index a9eb611..a4799ff 100644
> --- a/Documentation/devicetree/bindings/net/fsl-fec.txt
> +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
> @@ -12,6 +12,9 @@ Optional properties:
> only if property "phy-reset-gpios" is available. Missing the property
> will have the duration be 1 millisecond. Numbers greater than 1000 are
> invalid and 1 millisecond will be used instead.
> +- phy-reset-active-low : If present then the reset sequence using the GPIO
> + specified in the "phy-reset-gpios" property is reversed (H=reset state,
> + L=operation state).

Hi Bernhard

Maybe at the same time add a comment to phy-reset-gpios that the flags
part is ignored, see the none standard phy-reset-active-low property
instead.

Andrew

\
 
 \ /
  Last update: 2016-02-08 23:01    [W:0.083 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site