lkml.org 
[lkml]   [2016]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4] iio: adc: Add TI ADS1015 ADC driver support
From
On Mon, Feb 8, 2016 at 4:44 PM, Daniel Baluta <daniel.baluta@intel.com> wrote:
> On Mon, Feb 8, 2016 at 12:25 PM, Wolfram Sang <wsa@the-dreams.de> wrote:
>> On Fri, Feb 05, 2016 at 06:32:45PM -0600, Michael Welling wrote:
>>> On Fri, Feb 05, 2016 at 09:32:34PM +0200, Daniel Baluta wrote:
>>> > >> +static int ads1015_read_raw(struct iio_dev *indio_dev,
>>> > >> + struct iio_chan_spec const *chan, int *val,
>>> > >> + int *val2, long mask)
>>> > >> +{
>>> > >> + int ret, idx;
>>> > >> + struct ads1015_data *data = iio_priv(indio_dev);
>>> > >> +
>>> > >> + mutex_lock(&data->lock);
>>> > >> + switch (mask) {
>>> > >> + case IIO_CHAN_INFO_RAW:
>>> > >> + if (iio_buffer_enabled(indio_dev)) {
>>> > >> + ret = -EBUSY;
>>> > >> + break;
>>> > >> + }
>>> > >> +
>>> > >> + ret = ads1015_set_power_state(data, true);
>>> > >> + if (ret < 0)
>>> > >> + break;
>>> > >
>>> > > Just tested the driver on a Dragonboard 410C with a robotics mezzanine that I
>>> > > designed.
>>> > >
>>> > > The above ads1015_set_power_state(data, true) is always returning -EINVAL.
>>> > >
>>> > > Any ideas why that would be happening?
>>> > > I think it may be the return from pm_runtime_get_sync?
>>> >
>>> > Can you confirm that pm_runtime_get_sync fails? Using some printk?
>>> >
>>> > Also adding printks in suspend/resume function would be helpful. Do
>>> > you have CONFIG_PM enabled?
>>> >
>>>
>>> Indeed it is the pm_runtime_get_sync that fails with a -EINVAL.
>
> Can you check the output of:
> $ cat /sys/bus/iio/devices/iio:device0/power/runtime_status
>
> * after insmod
> * after a reading from sysfs
>
>>>
>>> > >
>>> > > When I comment out the break the readings come back but are not updated continually.
>>> > > If I read in_voltage0-voltage1_raw then in_voltage0_raw the value is updated.
>>> >
>>> > I guess this is normal if set_power_state fails.
>>>
>>> The hwmod driver works fine BTW.
>>>
>>> My guess is there is an issue with the qup i2c driver seeing as it has worked on
>>> other system without issue.
>>>
>>> CC'd some the latest developer on the qup i2c driver.
>>>
>>> I2C guys have any ideas on this?
>>>
>>
>> Adding some more people who recently worked on this. Might be nice to
>> know which kernel version you are using.

Jonathan,

I will send an update version with your comments addressed once
we sort out this runtime pm issue.

Michael,

If you questions we can discuss on #linux-iio IRC channel
under irc.oftc.net server.

thanks,
Daniel.

\
 
 \ /
  Last update: 2016-02-08 16:21    [W:1.160 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site