lkml.org 
[lkml]   [2016]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [Update][PATCH 3/3] cpufreq: governor: Replace timers with utilization update callbacks
Date
On Thursday, February 04, 2016 10:19:59 AM Viresh Kumar wrote:
> On 03-02-16, 02:16, Rafael J. Wysocki wrote:
> > Index: linux-pm/drivers/cpufreq/cpufreq_governor.c
> > -void gov_add_timers(struct cpufreq_policy *policy, unsigned int delay)
> > +void gov_set_update_util(struct cpu_common_dbs_info *shared,
> > + unsigned int delay_us)
> > {
> > + struct cpufreq_policy *policy = shared->policy;
> > struct dbs_data *dbs_data = policy->governor_data;
> > - struct cpu_dbs_info *cdbs;
> > int cpu;
> >
> > + shared->sample_delay_ns = delay_us * NSEC_PER_USEC;
> > + shared->time_stamp = ktime_get();
> > +
> > for_each_cpu(cpu, policy->cpus) {
> > - cdbs = dbs_data->cdata->get_cpu_cdbs(cpu);
> > - cdbs->timer.expires = jiffies + delay;
> > - add_timer_on(&cdbs->timer, cpu);
> > + struct cpu_dbs_info *cdbs = dbs_data->cdata->get_cpu_cdbs(cpu);
> > +
> > + cdbs->last_sample_time = 0;
> > + cpufreq_set_update_util_data(cpu, &cdbs->update_util);
>
> Why no synchronize_rcu() here?

Because it is not needed. This always changes a NULL pointer into a non-NULL.

> This can be called from ondemand governor on sampling-rate updates ..

But that calls gov_cancel_work() before, right?

>
> > }
> > }
> > -EXPORT_SYMBOL_GPL(gov_add_timers);
> > +EXPORT_SYMBOL_GPL(gov_set_update_util);
> >
> > -static inline void gov_cancel_timers(struct cpufreq_policy *policy)
> > +static inline void gov_clear_update_util(struct cpufreq_policy *policy)
> > {
> > - struct dbs_data *dbs_data = policy->governor_data;
> > - struct cpu_dbs_info *cdbs;
> > int i;
> >
> > - for_each_cpu(i, policy->cpus) {
> > - cdbs = dbs_data->cdata->get_cpu_cdbs(i);
> > - del_timer_sync(&cdbs->timer);
> > - }
> > + for_each_cpu(i, policy->cpus)
> > + cpufreq_set_update_util_data(i, NULL);
> > +
> > + synchronize_rcu();
> > }
> >
> > void gov_cancel_work(struct cpu_common_dbs_info *shared)
> > {
> > - /* Tell dbs_timer_handler() to skip queuing up work items. */
> > + /* Tell dbs_update_util_handler() to skip queuing up work items. */
> > atomic_inc(&shared->skip_work);
> > /*
> > - * If dbs_timer_handler() is already running, it may not notice the
> > - * incremented skip_work, so wait for it to complete to prevent its work
> > - * item from being queued up after the cancel_work_sync() below.
> > - */
> > - gov_cancel_timers(shared->policy);
> > - /*
> > - * In case dbs_timer_handler() managed to run and spawn a work item
> > - * before the timers have been canceled, wait for that work item to
> > - * complete and then cancel all of the timers set up by it. If
> > - * dbs_timer_handler() runs again at that point, it will see the
> > - * positive value of skip_work and won't spawn any more work items.
> > + * If dbs_update_util_handler() is already running, it may not notice
> > + * the incremented skip_work, so wait for it to complete to prevent its
> > + * work item from being queued up after the cancel_work_sync() below.
> > */
> > + gov_clear_update_util(shared->policy);
> > cancel_work_sync(&shared->work);
>
> How are we sure that the irq-work can't be pending at this point of
> time, which will queue the above works again ?

Good point. The irq_work has to be waited for here too.

> > - gov_cancel_timers(shared->policy);
> > atomic_set(&shared->skip_work, 0);
> > }
> > EXPORT_SYMBOL_GPL(gov_cancel_work);
> >
> > -/* Will return if we need to evaluate cpu load again or not */
> > -static bool need_load_eval(struct cpu_common_dbs_info *shared,
> > - unsigned int sampling_rate)
> > -{
> > - if (policy_is_shared(shared->policy)) {
> > - ktime_t time_now = ktime_get();
> > - s64 delta_us = ktime_us_delta(time_now, shared->time_stamp);
> > -
> > - /* Do nothing if we recently have sampled */
> > - if (delta_us < (s64)(sampling_rate / 2))
> > - return false;
> > - else
> > - shared->time_stamp = time_now;
> > - }
> > -
> > - return true;
> > -}
> > -
> > static void dbs_work_handler(struct work_struct *work)
> > {
> > struct cpu_common_dbs_info *shared = container_of(work, struct
> > @@ -235,14 +212,10 @@ static void dbs_work_handler(struct work
> > struct cpufreq_policy *policy;
> > struct dbs_data *dbs_data;
> > unsigned int sampling_rate, delay;
> > - bool eval_load;
> >
> > policy = shared->policy;
> > dbs_data = policy->governor_data;
> >
> > - /* Kill all timers */
> > - gov_cancel_timers(policy);
> > -
> > if (dbs_data->cdata->governor == GOV_CONSERVATIVE) {
> > struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
> >
> > @@ -253,37 +226,53 @@ static void dbs_work_handler(struct work
> > sampling_rate = od_tuners->sampling_rate;
> > }
> >
> > - eval_load = need_load_eval(shared, sampling_rate);
> > -
> > /*
> > - * Make sure cpufreq_governor_limits() isn't evaluating load in
> > + * Make sure cpufreq_governor_limits() isn't evaluating load or the
> > + * ondemand governor isn't reading the time stamp and sampling rate in
> > * parallel.
> > */
> > mutex_lock(&shared->timer_mutex);
> > - delay = dbs_data->cdata->gov_dbs_timer(policy, eval_load);
> > + delay = dbs_data->cdata->gov_dbs_timer(policy);
> > + shared->sample_delay_ns = jiffies_to_nsecs(delay);
> > + shared->time_stamp = ktime_get();
> > mutex_unlock(&shared->timer_mutex);
> >
> > + smp_mb__before_atomic();
>
> And why is this required exactly ? Maybe a comment as well to clarify
> this as this isn't obvious ?

OK, you have a point.

This relies on the atomic_dec() below to happen after sample_delay_ns has
been updated, to prevent dbs_update_util_handler() from using a stale
value.

> > atomic_dec(&shared->skip_work);
> > +}
> >
> > - gov_add_timers(policy, delay);
> > +static void dbs_irq_work(struct irq_work *irq_work)
> > +{
> > + struct cpu_common_dbs_info *shared;
> > +
> > + shared = container_of(irq_work, struct cpu_common_dbs_info, irq_work);
> > + schedule_work(&shared->work);
> > }
> >
> > -static void dbs_timer_handler(unsigned long data)
> > +static void dbs_update_util_handler(struct update_util_data *data, u64 time,
> > + unsigned long util, unsigned long max)
> > {
> > - struct cpu_dbs_info *cdbs = (struct cpu_dbs_info *)data;
> > + struct cpu_dbs_info *cdbs = container_of(data, struct cpu_dbs_info, update_util);
> > struct cpu_common_dbs_info *shared = cdbs->shared;
> >
> > /*
> > - * Timer handler may not be allowed to queue the work at the moment,
> > - * because:
> > - * - Another timer handler has done that
> > - * - We are stopping the governor
> > - * - Or we are updating the sampling rate of the ondemand governor
> > + * The work may not be allowed to be queued up right now.
> > + * Possible reasons:
> > + * - Work has already been queued up or is in progress.
> > + * - The governor is being stopped.
> > + * - It is too early (too little time from the previous sample).
> > */
> > - if (atomic_inc_return(&shared->skip_work) > 1)
> > - atomic_dec(&shared->skip_work);
> > - else
> > - queue_work(system_wq, &shared->work);
> > + if (atomic_inc_return(&shared->skip_work) == 1) {
> > + u64 delta_ns;
> > +
> > + delta_ns = time - cdbs->last_sample_time;
> > + if ((s64)delta_ns >= shared->sample_delay_ns) {
> > + cdbs->last_sample_time = time;
> > + irq_work_queue_on(&shared->irq_work, smp_processor_id());
> > + return;
> > + }
> > + }
> > + atomic_dec(&shared->skip_work);
> > }
> >
> > static void set_sampling_rate(struct dbs_data *dbs_data,
> > @@ -467,9 +456,6 @@ static int cpufreq_governor_start(struct
> > io_busy = od_tuners->io_is_busy;
> > }
> >
> > - shared->policy = policy;
> > - shared->time_stamp = ktime_get();
> > -
> > for_each_cpu(j, policy->cpus) {
> > struct cpu_dbs_info *j_cdbs = cdata->get_cpu_cdbs(j);
> > unsigned int prev_load;
> > @@ -485,10 +471,10 @@ static int cpufreq_governor_start(struct
> > if (ignore_nice)
> > j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
> >
> > - __setup_timer(&j_cdbs->timer, dbs_timer_handler,
> > - (unsigned long)j_cdbs,
> > - TIMER_DEFERRABLE | TIMER_IRQSAFE);
> > + j_cdbs->update_util.func = dbs_update_util_handler;
> > }
> > + shared->policy = policy;
> > + init_irq_work(&shared->irq_work, dbs_irq_work);
> >
> > if (cdata->governor == GOV_CONSERVATIVE) {
> > struct cs_cpu_dbs_info_s *cs_dbs_info =
> > @@ -505,7 +491,7 @@ static int cpufreq_governor_start(struct
> > od_ops->powersave_bias_init_cpu(cpu);
> > }
> >
> > - gov_add_timers(policy, delay_for_sampling_rate(sampling_rate));
> > + gov_set_update_util(shared, sampling_rate);
> > return 0;
> > }
> >
> > Index: linux-pm/drivers/cpufreq/cpufreq_ondemand.c
> > ===================================================================
> > --- linux-pm.orig/drivers/cpufreq/cpufreq_ondemand.c
> > +++ linux-pm/drivers/cpufreq/cpufreq_ondemand.c
> > @@ -191,7 +191,7 @@ static void od_check_cpu(int cpu, unsign
> > }
> > }
> >
> > -static unsigned int od_dbs_timer(struct cpufreq_policy *policy, bool modify_all)
> > +static unsigned int od_dbs_timer(struct cpufreq_policy *policy)
> > {
> > struct dbs_data *dbs_data = policy->governor_data;
> > unsigned int cpu = policy->cpu;
> > @@ -200,9 +200,6 @@ static unsigned int od_dbs_timer(struct
> > struct od_dbs_tuners *od_tuners = dbs_data->tuners;
> > int delay = 0, sample_type = dbs_info->sample_type;
>
> Perhaps, the delay = 0 can be dropped now and ...
>
> >
> > - if (!modify_all)
> > - goto max_delay;
> > -
> > /* Common NORMAL_SAMPLE setup */
> > dbs_info->sample_type = OD_NORMAL_SAMPLE;
> > if (sample_type == OD_SUB_SAMPLE) {
> > @@ -218,7 +215,6 @@ static unsigned int od_dbs_timer(struct
> > }
> > }
> >
> > -max_delay:
> > if (!delay)
> > delay = delay_for_sampling_rate(od_tuners->sampling_rate
> > * dbs_info->rate_mult);
>
> ^^ can be moved to the else part of above block ..

Both this and the above are valid observation, but those changes should be
made in a follow-up patch IMO.

> > @@ -264,7 +260,7 @@ static void update_sampling_rate(struct
> > struct od_cpu_dbs_info_s *dbs_info;
> > struct cpu_dbs_info *cdbs;
> > struct cpu_common_dbs_info *shared;
> > - unsigned long next_sampling, appointed_at;
> > + ktime_t next_sampling, appointed_at;
> >
> > dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
> > cdbs = &dbs_info->cdbs;
> > @@ -292,16 +288,19 @@ static void update_sampling_rate(struct
> > continue;
> >
> > /*
> > - * Checking this for any CPU should be fine, timers for all of
> > - * them are scheduled together.
> > + * Checking this for any CPU sharing the policy should be fine,
> > + * they are all scheduled to sample at the same time.
> > */
> > - next_sampling = jiffies + usecs_to_jiffies(new_rate);
> > - appointed_at = dbs_info->cdbs.timer.expires;
> > + next_sampling = ktime_add_us(ktime_get(), new_rate);
> >
> > - if (time_before(next_sampling, appointed_at)) {
> > - gov_cancel_work(shared);
> > - gov_add_timers(policy, usecs_to_jiffies(new_rate));
> > + mutex_lock(&shared->timer_mutex);
>
> Why is taking this lock important here ?

Because this reads both time_stamp and sample_delay_ns and uses them in
a computation. If they happen to be out of sync, this surely isn't right.

> > + appointed_at = ktime_add_ns(shared->time_stamp,
>
> Also I failed to understand why we need time_stamp variable at all?
> Why can't we use last_sample_time ?

Because the time base for last_sample_time may be different, so comparing it
to the return value of ktime_get() may not lead to correct decisions, so to
speak.

> > + shared->sample_delay_ns);
> > + mutex_unlock(&shared->timer_mutex);
> >
> > + if (ktime_before(next_sampling, appointed_at)) {
> > + gov_cancel_work(shared);
> > + gov_set_update_util(shared, new_rate);
>
> You don't need to a complete update here, the pointers are all fine.

I do, but that's not because of the pointers.

Effectively, I need to change sample_delay_ns and that's the most startghtforward
way to do that safely.

It may not be the most efficient, but this is not a fast path anyway.

> > }
> > }
>
>

Thanks,
Rafael

\
 
 \ /
  Last update: 2016-02-04 12:01    [W:0.199 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site