lkml.org 
[lkml]   [2016]   [Feb]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 1/2] gpio: designware: switch device node to fwnode and add acpi binding
From
Date
在 2016/2/29 21:51, Andy Shevchenko 写道:
> On Mon, Feb 29, 2016 at 3:13 PM, qiujiang <qiujiang@huawei.com> wrote:
>> This patch switches device node to fwnode and adds acpi
>> binding. As a result, DT and acpi bingdings are compatible
>> for this driver.
>
> I'm not sure it makes sense to add ACPI binding here. It more logical
> to me to add them in patch 2/2.
> And I see that it touches different subsystems.
>
>>
>> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
>
> Due to above and Mika's Ack was only to ACPI parts, I think
> you may be split this also to two and we will have clearly logical set:
> 1. Convert to fwnode
> 2. Add ACPI bindings
> 3. ACPI event support.
>
> Does it sound okay to you?
>
Sure, I will do that ASAP, thank you.
> If you do that I give my
> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> to intel_quark_i2c_gpio.c part and
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> to the rest.
>
>> Signed-off-by: qiujiang <qiujiang@huawei.com>
>> ---
>> drivers/gpio/gpio-dwapb.c | 62 +++++++++++++++++++-------------
>> drivers/mfd/intel_quark_i2c_gpio.c | 2 +-
>> include/linux/platform_data/gpio-dwapb.h | 2 +-
>> 3 files changed, 39 insertions(+), 27 deletions(-)
>>
>> diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
>> index 597de1e..7a37c65 100644
>> --- a/drivers/gpio/gpio-dwapb.c
>> +++ b/drivers/gpio/gpio-dwapb.c
>> @@ -7,6 +7,7 @@
>> *
>> * All enquiries to support@picochip.com
>> */
>> +#include <linux/acpi.h>
>
> +#include <linux/property.h> instead (see above).
>
>> #include <linux/gpio/driver.h>
>> /* FIXME: for gpio_get_value(), replace this with direct register read */
>> #include <linux/gpio.h>
>
>> @@ -496,18 +492,27 @@ dwapb_gpio_get_pdata_of(struct device *dev)
>> * Only port A can provide interrupts in all configurations of
>> * the IP.
>> */
>> - if (pp->idx == 0 &&
>> - of_property_read_bool(port_np, "interrupt-controller")) {
>> - pp->irq = irq_of_parse_and_map(port_np, 0);
>> + if (dev->of_node && pp->idx == 0 &&
>> + of_property_read_bool(to_of_node(fwnode),
>> + "interrupt-controller")) {
>
>> + if (has_acpi_companion(dev) && pp->idx == 0)
>> + pp->irq = platform_get_irq(to_platform_device(dev), 0);
>> +
>
> To patch 2.
>
>> pp->irq_shared = false;
>> pp->gpio_base = -1;
>
>> - pp->name = port_np->full_name;
>> +
>> + if (dev->of_node)
>> + pp->name = to_of_node(fwnode)->full_name;
>> +
>
> And here you have to provide something in case of default / built-in
> device properties.
>
>
>> + if (has_acpi_companion(dev))
>> + pp->name = acpi_dev_name(to_acpi_device_node(fwnode));
>
> To patch 2.
>
>> }
>>
>> return pdata;
>
>> @@ -580,6 +585,12 @@ static const struct of_device_id dwapb_of_match[] = {
>> };
>> MODULE_DEVICE_TABLE(of, dwapb_of_match);
>>
>> +static const struct acpi_device_id dwapb_acpi_match[] = {
>> + {"HISI0181", 0},
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(acpi, dwapb_acpi_match);
>> +
>> #ifdef CONFIG_PM_SLEEP
>> static int dwapb_gpio_suspend(struct device *dev)
>> {
>> @@ -674,6 +685,7 @@ static struct platform_driver dwapb_gpio_driver = {
>> .name = "gpio-dwapb",
>> .pm = &dwapb_gpio_pm_ops,
>> .of_match_table = of_match_ptr(dwapb_of_match),
>> + .acpi_match_table = ACPI_PTR(dwapb_acpi_match),
>> },
>> .probe = dwapb_gpio_probe,
>> .remove = dwapb_gpio_remove,
>
> Ditto to the above hunks.
>

\
 
 \ /
  Last update: 2016-03-01 03:01    [W:0.051 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site