Messages in this thread | | | From | Matthieu Rogez <> | Subject | Improve Terratec Grabby (hw rev 2) support | Date | Sun, 28 Feb 2016 12:26:20 +0100 |
| |
These patches improve support for the Terratec Grabby A/V capture device. The first two patches add support for the REC button and led. The third patch fixes AC97 codec detection by delaying card setup until i2c communication to EMP202 device is reliable.
To test this: * modprobe em28xx-alsa * connect Grabby * mplayer tv:// -tv driver=v4l2:width=720:height=576:device=/dev/video1:input=0:fps=25:norm=SECAM-L:alsa:adevice=plughw.2:audiorate=48000:forceaudio:amode=1:immediatemode=0 -nocache -fps 60
NOTE: for some unknown reason, if em28xx-alsa is not loaded when Grabby is connected, there will be no sound. NOTE2: if Grabby is connected without loading em28xx-alsa first, just deconnect the Grabby and reconnect it.
| |