lkml.org 
[lkml]   [2016]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] irqchip: add lpc18xx gpio pin interrupt driver
On Thu, 25 Feb 2016, Joachim Eastwood wrote:
> +static void lpc18xx_gpio_pint_handler(struct irq_desc *desc)
> +{
> + struct lpc18xx_gpio_pint_chip *pint = irq_desc_get_handler_data(desc);
> + unsigned int irq = irq_desc_get_irq(desc);
> + int irq_no, i;
> +
> + /* Find the interrupt */
> + for (i = 0; i < pint->nrirqs; i++) {
> + if (pint->irqmap[i] == irq) {

Why don't you have a reverse map for this?

> + irq_no = irq_find_mapping(pint->domain, i);
> + generic_handle_irq(irq_no);
> + }
> + }
> +}
> +
> +static void lpc18xx_gpio_pint_edge_ack(struct irq_data *d)
> +{
> + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
> + u32 mask = d->mask;
> +
> + irq_gc_lock(gc);
> + irq_reg_writel(gc, mask, LPC18XX_GPIO_PINT_IST);
> + irq_gc_unlock(gc);
> +}

How is that different from irq_gc_ack_set_bit ?

> +static void lpc18xx_gpio_pint_edge_mask(struct irq_data *d)
> +{
> + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
> + u32 mask = d->mask;
> +
> + irq_gc_lock(gc);
> + irq_reg_writel(gc, mask, LPC18XX_GPIO_PINT_CIENR);
> + irq_reg_writel(gc, mask, LPC18XX_GPIO_PINT_CIENF);
> + irq_gc_unlock(gc);
> +}

If you use seperate irq types, then you can use the generic chip functions and
be done with it.

> +static void lpc18xx_gpio_pint_edge_unmask(struct irq_data *d)
> +{
> + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
> + u32 type, mask = d->mask;
> +
> + irq_gc_lock(gc);
> + type = irqd_get_trigger_type(d);
> + if (type & IRQ_TYPE_EDGE_RISING)
> + irq_reg_writel(gc, mask, LPC18XX_GPIO_PINT_SIENR);
> + if (type & IRQ_TYPE_EDGE_FALLING)
> + irq_reg_writel(gc, mask, LPC18XX_GPIO_PINT_SIENF);
> + irq_gc_unlock(gc);
> +}
> +
> +static void lpc18xx_gpio_pint_level_mask(struct irq_data *d)
> +{
> + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
> + u32 mask = d->mask;
> +
> + irq_gc_lock(gc);
> + irq_reg_writel(gc, mask, LPC18XX_GPIO_PINT_CIENR);
> + irq_gc_unlock(gc);
> +}
> +
> +static void lpc18xx_gpio_pint_level_unmask(struct irq_data *d)
> +{
> + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
> + u32 mask = d->mask;
> +
> + irq_gc_lock(gc);
> + irq_reg_writel(gc, mask, LPC18XX_GPIO_PINT_SIENR);
> + irq_gc_unlock(gc);
> +}

All the callbacks can go away.

> +static int lpc18xx_gpio_pint_type(struct irq_data *data, unsigned int type)
> +{
> + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
> + u32 mask = data->mask;
> +
> + irq_gc_lock(gc);
> + if (type & IRQ_TYPE_LEVEL_MASK)
> + gc->type_cache |= mask;
> + else
> + gc->type_cache &= ~mask;
> + irq_reg_writel(gc, gc->type_cache, LPC18XX_GPIO_PINT_ISEL);
> +
> + switch (type) {
> + case IRQ_TYPE_LEVEL_HIGH:
> + irq_reg_writel(gc, mask, LPC18XX_GPIO_PINT_SIENF);
> + break;
> +
> + case IRQ_TYPE_LEVEL_LOW:
> + irq_reg_writel(gc, mask, LPC18XX_GPIO_PINT_CIENF);
> + break;
> +
> + /* IRQ_TYPE_EDGE_* is set in lpc18xx_gpio_pint_edge_unmask */
> + }
> +
> + irqd_set_trigger_type(data, type);
> + irq_setup_alt_chip(data, type);

So you already use an alt chip, but still implement your own callbacks?

WHY?

Thanks,

tglx


\
 
 \ /
  Last update: 2016-02-26 12:01    [W:0.786 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site