lkml.org 
[lkml]   [2016]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 03/10] perf report: Apply --percent-limit to callchains also
Em Tue, Feb 02, 2016 at 11:35:13PM +0900, Namhyung Kim escreveu:
> On Tue, Feb 02, 2016 at 11:27:34AM -0300, Arnaldo Carvalho de Melo wrote:
> > Em Tue, Feb 02, 2016 at 11:15:35PM +0900, Namhyung Kim escreveu:
> > > On Tue, Feb 02, 2016 at 10:55:34AM -0300, Arnaldo Carvalho de Melo wrote:
> > > > Em Tue, Feb 02, 2016 at 10:05:37PM +0900, Namhyung Kim escreveu:
> > > > > Hi Arnaldo,
> > > > >
> > > > > On Mon, Feb 01, 2016 at 05:19:36PM -0300, Arnaldo Carvalho de Melo wrote:
> > > > > > Em Thu, Jan 28, 2016 at 12:40:50AM +0900, Namhyung Kim escreveu:
> > > > > > > Currently --percent-limit option only works for hist entries. However
> > > > > > > it'd be better to have same effect to callchains as well
> > > > > >
> > > > > > Documentation needs updating? It says:
> > > > > >
> > > > > > --percent-limit::
> > > > > > Do not show entries which have an overhead under that percent.
> > > > > > (Default: 0).
> > > > >
> > > > > Right. Is it ok to you?
> > > > >
> > > > > --percent-limit::
> > > > > Do not show entries and callchains which have an overhead under that
> > > > > percent. (Default: 0).
> > > >
> > > > Ok, but is the default zero?
> > > >
> > > > That was what I was alluding to, as as soon as I applied the patch that
> > > > made callchains honour this limit, about 60% of the entries in the
> > > > particular perf.data file I was 'perf report'ing lost its '+' (callchain
> > > > expansion) signs.
> > >
> > > Yes, and this is what I want to say too. :)
> > >
> > > The default value of percent limit is different for hist entry and
> > > callchains. For hist entry the default is 0, and for callchains it's
> > > 0.5%. But using --percent-limit option, we can set both at once from
> > > now on.
> > >
> > > Before this patchset, percent limit of callchains didn't checked.
> > > Once applied, users can see callchains are disppeared like your case.
> > > This is just because 0.5% of the default limit for callchains is too
> > > high IMHO - I guess it was originally set for 'fractal' mode which
> > > calculates relative percents. So I proposed to change the default in
> > > the patch 10/10 but Andi thoughts 0.005% was too small. We need to
> > > choose other value like 0.05% ?
> >
> > Unsure about the limit, but please fold the nice explanation you gave
> > about the limits for hist entries and callchains and how the defaults
> > are different, and how they can be set at once using --percent-limit.
>
> Ok, will do.
>
> >
> > Also, would it be overengineering to allow optionally set two limits,
> > one for hists and one for callchains? I.e. like:
> >
> > --percent-limit 1,0.07
> >
> > Then:
> >
> > --percent-limit 0.8
> >
> > would be the same as:
> >
> > --percent-limit 0.8,0.8
>
> Originally, the percent limit (threshold) for callchains can be set
> using -g/--call-graph option. What Andi asked is to set both limits
> using a single option. Not sure it's worth adding another way to
> specify the callchain limit.

Ok, having that in the docs, i.e. when documenting --percent-limit
mention that the callchain limit can be set via the -g option as well
will help sort out confusion when trying to set those limits.

And have you considered setting these limits dynamicly? I.e. in the TUI?

- Arnaldo

\
 
 \ /
  Last update: 2016-02-02 16:21    [W:2.340 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site