lkml.org 
[lkml]   [2016]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] arm64: dts: add LED nodes for hi6220-hikey
Date
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 41 ++++++++++++++++++++++++++
1 file changed, 41 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index c4f560a..5a004b4 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -63,6 +63,47 @@
status = "ok";
};
};
+
+ leds {
+ compatible = "gpio-leds";
+ user_led1 {
+ label = "user_led4";
+ gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */
+ linux,default-trigger = "heartbeat";
+ };
+
+ user_led2 {
+ label = "user_led3";
+ gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */
+ linux,default-trigger = "mmc0";
+ };
+
+ user_led3 {
+ label = "user_led2";
+ gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */
+ linux,default-trigger = "mmc1";
+ };
+
+ user_led4 {
+ label = "user_led1";
+ gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */
+ linux,default-trigger = "cpu0";
+ };
+
+ wlan_active_led {
+ label = "wifi_active";
+ gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ bt_active_led {
+ label = "bt_active";
+ gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */
+ linux,default-trigger = "hci0rx";
+ default-state = "off";
+ };
+ };
};

&uart2 {
--
1.9.1
\
 
 \ /
  Last update: 2016-02-19 06:41    [W:0.057 / U:1.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site