lkml.org 
[lkml]   [2016]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
Date
Hi,

@Tony
Patches 15 and 24 are new and will need your review.
I've modified patch 22 to include the new am335x boards introduced since v4.4.

Patches are based on top of omap-for-v4.6/dt so that the DT changes apply cleanly.

@Brian
If you can Ack the MTD related changes we can push the series (excluding DT patches)
to an immutable branch and you can then pull it into l2-mtd.git

Patches tested on:
dra-evm, am437x-gp-evm, beagleboard-c4, beagleboard-c4-legacyboot

Changelog:
v5:
-changed ready/busy# GPIO DT binding from "ready-gpio" to "rb-gpios".
-use irqdomain for gpmc NAND interrupts: fifoevent and termcount

v4:
-Warn if using older incompatible DT i.e. compatible property not present
in nand node.
-Applied Tony's patch to fix broken ethernet on torpedo.

v3:
-Fixed and tested NAND using legacy boot on omap3-beagle.
-Support rising and falling edge interrupts on WAITpins.
-Update DT node of all gpmc users.

Patches summary:

We do a couple of things in this series which result in
cleaner device tree implementation, faster perfomance and
multi-platform support. As an added bonus we get to use the GPMC_WAIT
pins as GPI/Interrupts.

- Establish a custom interface between NAND and GPMC driver. This is
needed because all of the NAND registers sit in the GPMC register space.

- Clean up device tree support so that omap-gpmc IP and the omap2 NAND
driver can be used on non-OMAP platforms. e.g. Keystone.

- Implement GPIOCHIP for the GPMC WAITPINS. SoCs can contain
2 to 4 of these and most of them would be unused otherwise. It also
allows a cleaner implementation of NAND Ready pin status for the NAND driver.

- Implement GPMC IRQ domain to proivde the 2 NAND events and
GPMC WAITPIN edge interrupts.

- Implement GPIOlib based NAND ready pin checking for OMAP NAND driver.
On dra7-evm, Read speed increases from 13768 KiB/ to 17246 KiB/s.
Write speed was unchanged at 7123 KiB/s.

This series is available at
git@github.com:rogerq/linux.git
in branch
for-v4.6/gpmc-v5

--
cheers,
-roger

Roger Quadros (26):
ARM: OMAP2+: gpmc: Add platform data
ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data
memory: omap-gpmc: Introduce GPMC to NAND interface
mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers
memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status
mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty
check
memory: omap-gpmc: Implement IRQ domain for NAND IRQs
mtd: nand: omap: Copy platform data parameters to omap_nand_info data
mtd: nand: omap: Clean up device tree support
mtd: nand: omap: Update DT binding documentation
memory: omap-gpmc: Prevent mapping into 1st 16MB
memory: omap-gpmc: Move device tree binding to correct location
memory: omap-gpmc: Support general purpose input for WAITPINs
memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring
memory: omap-gpmc: Support WAIT pin edge interrupts
memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via
gpmc_regs
mtd: nand: omap2: Implement NAND ready using gpiolib
ARM: dts: dra7: Fix NAND device nodes.
ARM: dts: dra7x-evm: Provide NAND ready pin
ARM: dts: am437x: Fix NAND device nodes
ARM: dts: am437x: Provide NAND ready pin
ARM: dts: am335x: Fix NAND device nodes
ARM: dts: am335x: Provide NAND ready pin
ARM: dts: dm814x: Fix gpmc and NAND node
ARM: dts: dm816x: Fix gpmc and NAND node
ARM: dts: omap3: Fix gpmc and NAND nodes

Documentation/devicetree/bindings/bus/ti-gpmc.txt | 130 ----
.../bindings/memory-controllers/omap-gpmc.txt | 141 +++++
.../devicetree/bindings/mtd/gpmc-nand.txt | 19 +-
arch/arm/boot/dts/am335x-baltos-ir5221.dts | 10 +-
arch/arm/boot/dts/am335x-chilisom.dtsi | 9 +-
arch/arm/boot/dts/am335x-cm-t335.dts | 10 +-
arch/arm/boot/dts/am335x-evm.dts | 8 +-
arch/arm/boot/dts/am335x-igep0033.dtsi | 9 +-
arch/arm/boot/dts/am335x-phycore-som.dtsi | 9 +-
arch/arm/boot/dts/am33xx.dtsi | 4 +
arch/arm/boot/dts/am4372.dtsi | 4 +
arch/arm/boot/dts/am437x-cm-t43.dts | 7 +-
arch/arm/boot/dts/am437x-gp-evm.dts | 9 +-
arch/arm/boot/dts/am43x-epos-evm.dts | 9 +-
arch/arm/boot/dts/dm8148-evm.dts | 8 +-
arch/arm/boot/dts/dm814x.dtsi | 4 +
arch/arm/boot/dts/dm8168-evm.dts | 8 +-
arch/arm/boot/dts/dm816x.dtsi | 4 +
arch/arm/boot/dts/dra62x-j5eco-evm.dts | 8 +-
arch/arm/boot/dts/dra7-evm.dts | 7 +-
arch/arm/boot/dts/dra7.dtsi | 4 +
arch/arm/boot/dts/dra72-evm.dts | 7 +-
arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 3 +-
arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 8 +-
arch/arm/boot/dts/omap3-beagle.dts | 5 +-
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 6 +-
arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 4 +
arch/arm/boot/dts/omap3-evm-37xx.dts | 8 +-
arch/arm/boot/dts/omap3-gta04.dtsi | 4 +
arch/arm/boot/dts/omap3-igep.dtsi | 6 +-
arch/arm/boot/dts/omap3-igep0020-common.dtsi | 4 +-
arch/arm/boot/dts/omap3-igep0030-common.dtsi | 4 +
arch/arm/boot/dts/omap3-ldp.dts | 10 +-
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 6 +-
arch/arm/boot/dts/omap3-overo-base.dtsi | 6 +-
arch/arm/boot/dts/omap3-pandora-common.dtsi | 4 +
arch/arm/boot/dts/omap3-tao3530.dtsi | 6 +-
arch/arm/boot/dts/omap3.dtsi | 4 +
arch/arm/boot/dts/omap3430-sdp.dts | 6 +-
arch/arm/mach-omap2/gpmc-nand.c | 7 +-
drivers/memory/Kconfig | 1 +
drivers/memory/omap-gpmc.c | 653 +++++++++++++--------
drivers/mtd/nand/omap2.c | 193 ++++--
include/linux/omap-gpmc.h | 177 ++----
include/linux/platform_data/gpmc-omap.h | 167 ++++++
include/linux/platform_data/mtd-nand-omap2.h | 12 +-
46 files changed, 1121 insertions(+), 611 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/bus/ti-gpmc.txt
create mode 100644 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
create mode 100644 include/linux/platform_data/gpmc-omap.h

--
2.1.4

\
 
 \ /
  Last update: 2016-02-19 22:21    [W:0.517 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site