lkml.org 
[lkml]   [2016]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 5/6] hisi_sas: add hisi_sas_slave_configure()
From
Date
On 18/02/2016 10:30, Hannes Reinecke wrote:
> On 02/18/2016 11:12 AM, John Garry wrote:
>> On 18/02/2016 07:40, Hannes Reinecke wrote:
> [ .. ]
>>> Well, the classical thing would be to associate each request tag
>>> with a SAS task; or, in your case, associate each slot index with a
>>> request tag.
>>> You probably would need to reserve some slots for TMFs, ie you'd
>>> need to decrease the resulting ->can_queue variable by that.
>>> But once you've done that you shouldn't hit any QUEUE_FULL issues,
>>> as the block layer will ensure that no tags will be reused while the
>>> command is in flight.
>>> Plus this is something you really need to be doing if you ever
>>> consider moving to scsi-mq ...
>>>
>>> Cheers,
>>>
>>> Hannes
>>>
>> Hi,
>>
>> So would you recommend this method under the assumption that the
>> can_queue value for the host is similar to the queue depth for the
>> device?
>>
> That depends.
> Typically the can_queue setting reflects the number of commands the
> _host_ can queue internally (due to hardware limitations etc).
> They do not necessarily reflect the queue depth for the device
> (unless you have a single device, of course).
> So if the host has a hardware limit on the number of commands it can
> queue, it should set the 'can_queue' variable to the appropriate
> number; a host-wide shared tag map is always assumed with recent
> kernels.
>
> The queue_depth of an individual device is controlled by the
> 'cmd_per_lun' setting, and of course capped by can_queue.
>
> But yes, I definitely recommend this method.
> Is saves one _so much_ time trying to figure out which command slot
> to use. Drawback is that you have to have some sort of fixed order
> on them slots to do an efficient lookup.
>
> Cheers,
>
> Hannes
>

I would like to make a point on cmd_per_lun before considering tagging
slots: For our host the can_queue is considerably greater than
cmd_per_lun (even though we initially set the same in the host template,
which would be incorrect). Regardless I find the host cmd_per_lun is
effectively ignored for the slave device queue depth as it is reset in
sas_slave_configure() to 256 [if this function is used and tagging
enabled]. So if we we choose a reasonable cmd_per_lun for our host, it
is ignored, right? Or am I missing something?

Thanks,
John


\
 
 \ /
  Last update: 2016-02-18 12:21    [W:0.082 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site