lkml.org 
[lkml]   [2016]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC 1/3] ARM: dts: Add cooling levels for CPUs on exynos5420
From
Date
On 17.02.2016 16:01, Viresh Kumar wrote:
> On 17-02-16, 15:55, Krzysztof Kozlowski wrote:
>> On Exynos5420 we support 8 cpufreq steps (600-1300 MHz) for LITTLE and
>> 12 steps for big core (700-1800 MHz). Add respective cooling cells.
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>> ---
>> arch/arm/boot/dts/exynos5420-cpus.dtsi | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
>> index 261d25173f61..498ae82e1cb2 100644
>> --- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
>> +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
>> @@ -33,6 +33,9 @@
>> clock-frequency = <1800000000>;
>> cci-control-port = <&cci_control1>;
>> operating-points-v2 = <&cluster_a15_opp_table>;
>> + cooling-min-level = <0>;
>> + cooling-max-level = <11>;
>> + #cooling-cells = <2>; /* min followed by max */
>> };
>>
>> cpu1: cpu@1 {
>> @@ -70,6 +73,9 @@
>> clock-frequency = <1000000000>;
>> cci-control-port = <&cci_control0>;
>> operating-points-v2 = <&cluster_a7_opp_table>;
>> + cooling-min-level = <0>;
>> + cooling-max-level = <7>;
>> + #cooling-cells = <2>; /* min followed by max */
>> };
>
> Though it wouldn't matter (for the issue you are getting), but this should be
> added for all the CPUs in case some other CPU is booted first.

Thanks! I'll fix it also for patch 2/3.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2016-02-17 08:21    [W:0.051 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site