lkml.org 
[lkml]   [2016]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] ARM: dts: use syscon in cygnus touchscreen dt node
Date
In Cygnus SOC touch screen controller registers are shared
with ADC and flex timer. Using readl/writel could lead to
race condition. So in such case register access is handled
through syscon framework API's in the touch screen driver.
This feature is enabled if "brcm,iproc-touchscreen-syscon"
compatible string is selected in touchscreen dt node.

So this patch enables syscon support in touchscreen driver
by adding necessary properties in touchscreen dt node.

Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 3878793..79678c1 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -351,9 +351,16 @@
<&pinctrl 142 10 1>;
};

+ ts_adc_syscon: ts_adc_syscon@0x180a6000 {
+ compatible = "syscon";
+ reg = <0x180a6000 0xc30>;
+ };
+
touchscreen: tsc@180a6000 {
- compatible = "brcm,iproc-touchscreen";
- reg = <0x180a6000 0x40>;
+ compatible = "brcm,iproc-touchscreen-syscon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ts_syscon = <&ts_adc_syscon>;
clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
clock-names = "tsc_clk";
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
--
1.9.1
\
 
 \ /
  Last update: 2016-02-17 11:01    [W:0.067 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site