lkml.org 
[lkml]   [2016]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] rtc: s3c: Document in binding that only s3c6410 needs a src clk
From
Date
On 15.02.2016 23:11, Javier Martinez Canillas wrote:
> The S3C binding doc says that the RTC and RTC source clocks are required
> but the S3C driver supports different HW IP and only the s3c6410 needs a
> source clock.
>
> Fix the binding explaining that the source clock is only needed for the
> s3c6410-rtc compatible controller.
>
> Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
>
> ---
> Hello,
>
> This patch depends on a previous one that was picked by Rob Herring so
> this one has to go through his tree again and not through the RTC tree
> to avoid conflicts.
>
> Best regards,
> Javier
>
> Changes in v2:
> - Remove the mention to a commit sha-1 that's not in mainline (Alexandre).
> - Fix typo in commit message (Alexandre).
> - Add Alexandre's Acked-by tag.
>
> Documentation/devicetree/bindings/rtc/s3c-rtc.txt | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2016-02-16 01:01    [W:3.542 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site