lkml.org 
[lkml]   [2016]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3] iio: Add IIO support for the DAC on the Apex Embedded Systems STX104
From
Date
On 11/02/16 16:49, William Breathitt Gray wrote:
> The Apex Embedded Systems STX104 is a 16-channel 16-bit analog input and
> 2-channel 16-bit analog output PC/104 card. The STX104 incorporates a
> large one mega-sample FIFO.
>
> This driver provides IIO support for the 2-channel DAC on the STX104.
> The base port addresses for the devices may be configured via the "base"
> module parameter array.
>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Applied and pushed out as testing for the autobuilders to play with it.
Hopefully some standard build does x86 32 bit and the ISA bus as I'm feeling
too lazy to setup an extra build locally that can actually build this.
Will do so if we start to get lots of ISA cards though.

Jonathan
> ---
> Changes in v3:
> - Change module parameter "stx104_base" name to the more generic
> "base" name
>
> MAINTAINERS | 6 ++
> drivers/iio/dac/Kconfig | 9 +++
> drivers/iio/dac/Makefile | 1 +
> drivers/iio/dac/stx104.c | 152 +++++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 168 insertions(+)
> create mode 100644 drivers/iio/dac/stx104.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7c39a48..3cbff94 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -778,6 +778,12 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers)
> S: Maintained
> F: sound/aoa/
>
> +APEX EMBEDDED SYSTEMS STX104 DAC DRIVER
> +M: William Breathitt Gray <vilhelm.gray@gmail.com>
> +L: linux-iio@vger.kernel.org
> +S: Maintained
> +F: drivers/iio/dac/stx104.c
> +
> APM DRIVER
> M: Jiri Kosina <jikos@kernel.org>
> S: Odd fixes
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index 3c809e2..31a1985 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -208,4 +208,13 @@ config MCP4922
> To compile this driver as a module, choose M here: the module
> will be called mcp4922.
>
> +config STX104
> + tristate "Apex Embedded Systems STX104 DAC driver"
> + depends on ISA
> + help
> + Say yes here to build support for the 2-channel DAC on the Apex
> + Embedded Systems STX104 integrated analog PC/104 card. The base port
> + addresses for the devices may be configured via the "base" module
> + parameter array.
> +
> endmenu
> diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
> index cb525b5..e2deda9 100644
> --- a/drivers/iio/dac/Makefile
> +++ b/drivers/iio/dac/Makefile
> @@ -22,3 +22,4 @@ obj-$(CONFIG_MAX517) += max517.o
> obj-$(CONFIG_MAX5821) += max5821.o
> obj-$(CONFIG_MCP4725) += mcp4725.o
> obj-$(CONFIG_MCP4922) += mcp4922.o
> +obj-$(CONFIG_STX104) += stx104.o
> diff --git a/drivers/iio/dac/stx104.c b/drivers/iio/dac/stx104.c
> new file mode 100644
> index 0000000..174f4b7
> --- /dev/null
> +++ b/drivers/iio/dac/stx104.c
> @@ -0,0 +1,152 @@
> +/*
> + * DAC driver for the Apex Embedded Systems STX104
> + * Copyright (C) 2016 William Breathitt Gray
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License, version 2, as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + */
> +#include <linux/bitops.h>
> +#include <linux/device.h>
> +#include <linux/errno.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/types.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/isa.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +
> +#define STX104_NUM_CHAN 2
> +
> +#define STX104_CHAN(chan) { \
> + .type = IIO_VOLTAGE, \
> + .channel = chan, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> + .indexed = 1, \
> + .output = 1 \
> +}
> +
> +#define STX104_EXTENT 16
> +/**
> + * The highest base address possible for an ISA device is 0x3FF; this results in
> + * 1024 possible base addresses. Dividing the number of possible base addresses
> + * by the address extent taken by each device results in the maximum number of
> + * devices on a system.
> + */
> +#define MAX_NUM_STX104 (1024 / STX104_EXTENT)
> +
> +static unsigned base[MAX_NUM_STX104];
> +static unsigned num_stx104;
> +module_param_array(base, uint, &num_stx104, 0);
> +MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses");
> +
> +/**
> + * struct stx104_iio - IIO device private data structure
> + * @chan_out_states: channels' output states
> + * @base: base port address of the IIO device
> + */
> +struct stx104_iio {
> + unsigned chan_out_states[STX104_NUM_CHAN];
> + unsigned base;
> +};
> +
> +static int stx104_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val, int *val2, long mask)
> +{
> + struct stx104_iio *const priv = iio_priv(indio_dev);
> +
> + if (mask != IIO_CHAN_INFO_RAW)
> + return -EINVAL;
> +
> + *val = priv->chan_out_states[chan->channel];
> +
> + return IIO_VAL_INT;
> +}
> +
> +static int stx104_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val, int val2, long mask)
> +{
> + struct stx104_iio *const priv = iio_priv(indio_dev);
> + const unsigned chan_addr_offset = 2 * chan->channel;
> +
> + if (mask != IIO_CHAN_INFO_RAW)
> + return -EINVAL;
> +
> + priv->chan_out_states[chan->channel] = val;
> + outw(val, priv->base + 4 + chan_addr_offset);
> +
> + return 0;
> +}
> +
> +static const struct iio_info stx104_info = {
> + .driver_module = THIS_MODULE,
> + .read_raw = stx104_read_raw,
> + .write_raw = stx104_write_raw
> +};
> +
> +static const struct iio_chan_spec stx104_channels[STX104_NUM_CHAN] = {
> + STX104_CHAN(0),
> + STX104_CHAN(1)
> +};
> +
> +static int stx104_probe(struct device *dev, unsigned int id)
> +{
> + struct iio_dev *indio_dev;
> + struct stx104_iio *priv;
> +
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + if (!devm_request_region(dev, base[id], STX104_EXTENT,
> + dev_name(dev))) {
> + dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
> + base[id], base[id] + STX104_EXTENT);
> + return -EBUSY;
> + }
> +
> + indio_dev->info = &stx104_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->channels = stx104_channels;
> + indio_dev->num_channels = STX104_NUM_CHAN;
> + indio_dev->name = dev_name(dev);
> +
> + priv = iio_priv(indio_dev);
> + priv->base = base[id];
> +
> + /* initialize DAC output to 0V */
> + outw(0, base[id] + 4);
> + outw(0, base[id] + 6);
> +
> + return devm_iio_device_register(dev, indio_dev);
> +}
> +
> +static struct isa_driver stx104_driver = {
> + .probe = stx104_probe,
> + .driver = {
> + .name = "stx104"
> + }
> +};
> +
> +static void __exit stx104_exit(void)
> +{
> + isa_unregister_driver(&stx104_driver);
> +}
> +
> +static int __init stx104_init(void)
> +{
> + return isa_register_driver(&stx104_driver, num_stx104);
> +}
> +
> +module_init(stx104_init);
> +module_exit(stx104_exit);
> +
> +MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
> +MODULE_DESCRIPTION("Apex Embedded Systems STX104 DAC driver");
> +MODULE_LICENSE("GPL v2");
>

\
 
 \ /
  Last update: 2016-02-13 15:21    [W:0.051 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site