lkml.org 
[lkml]   [2016]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/4] regulator: lp872x: Add enable GPIO pin support
From
Date
Hi,
Le vendredi 12 février 2016 à 09:14 +0900, Kim, Milo a écrit :
> Thanks for the patch. Please see my comments below.

Thanks for the review!

> On 2/6/2016 3:42 AM, Paul Kocialkowski wrote:
> > LP872x regulators are made active via the EN pin, which might be hooked to a
> > GPIO. This adds support for driving the GPIO high when the driver is in use.
> >
> > Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> > ---
> > .../devicetree/bindings/regulator/lp872x.txt | 1 +
> > drivers/regulator/lp872x.c | 34 ++++++++++++++++++++++
> > include/linux/regulator/lp872x.h | 5 ++++
> > 3 files changed, 40 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt
> > index 7818318..ca58a68 100644
> > --- a/Documentation/devicetree/bindings/regulator/lp872x.txt
> > +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt
> > @@ -28,6 +28,7 @@ Optional properties:
> > - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices.
> > - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
> > - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
> > + - enable-gpios: GPIO specifier for EN pin control of LP872x devices.
> >
> > Sub nodes for regulator_init_data
> > LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck)
> > diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
> > index 21c49d8..3899211 100644
> > --- a/drivers/regulator/lp872x.c
> > +++ b/drivers/regulator/lp872x.c
> > @@ -15,6 +15,7 @@
> > #include <linux/regmap.h>
> > #include <linux/err.h>
> > #include <linux/gpio.h>
> > +#include <linux/delay.h>
> > #include <linux/regulator/lp872x.h>
> > #include <linux/regulator/driver.h>
> > #include <linux/platform_device.h>
> > @@ -757,6 +758,33 @@ set_default_dvs_mode:
> > default_dvs_mode[lp->chipid]);
> > }
> >
> > +static int lp872x_hw_enable(struct lp872x *lp)
> > +{
> > + int ret, gpio;
> > +
> > + if (!lp->pdata)
> > + return -EINVAL;
> > +
> > + gpio = lp->pdata->enable_gpio;
> > + if (!gpio_is_valid(gpio))
> > + return 0;
>
> It seems gpio is always 0 when it starts from DT. 'enable_gpio' is
> updated in lp872x_config() but lp872x_hw_enable() is called first.

Actually, enable_gpio is updated in lp872x_populate_pdata_from_dt.

> > +
> > + /* Always set enable GPIO high. */
> > + ret = devm_gpio_request_one(lp->dev, gpio, GPIOF_OUT_INIT_HIGH, "LP872X EN");
> > + if (ret) {
> > + dev_err(lp->dev, "gpio request err: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + /* Each chip has a different enable delay. */
> > + if (lp->chipid == LP8720)
> > + usleep_range(LP8720_ENABLE_DELAY, 1.5 * LP8720_ENABLE_DELAY);
> > + else
> > + usleep_range(LP8725_ENABLE_DELAY, 1.5 * LP8725_ENABLE_DELAY);
> > +
> > + return 0;
> > +}
> > +
> > static int lp872x_config(struct lp872x *lp)
> > {
> > struct lp872x_platform_data *pdata = lp->pdata;
> > @@ -875,6 +903,8 @@ static struct lp872x_platform_data
> > of_property_read_u8(np, "ti,dvs-state", &dvs_state);
> > pdata->dvs->init_state = dvs_state ? DVS_HIGH : DVS_LOW;
> >
> > + pdata->enable_gpio = of_get_named_gpio(np, "enable-gpios", 0);
>
> Please move this code to lp872x_populate_pdata_from_dt().

This already adds it in lp872x_populate_pdata_from_dt (see the context
around the insertion).

I don't know why the diff makes it seem like it's added in
lp872x_config. It's really not.

> lp872x_hw_enable() is called prior to lp872x_config(), so enable_gpio
> should be set on parsing the DT properties.

Of course.

> > +
> > if (of_get_child_count(np) == 0)
> > goto out;
> >
> > @@ -948,6 +978,10 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> > lp->chipid = id->driver_data;
> > i2c_set_clientdata(cl, lp);
> >
> > + ret = lp872x_hw_enable(lp);
> > + if (ret)
> > + return ret;
> > +
> > ret = lp872x_config(lp);
> > if (ret)
> > return ret;
> > diff --git a/include/linux/regulator/lp872x.h b/include/linux/regulator/lp872x.h
> > index 132e05c..6029279 100644
> > --- a/include/linux/regulator/lp872x.h
> > +++ b/include/linux/regulator/lp872x.h
> > @@ -18,6 +18,9 @@
> >
> > #define LP872X_MAX_REGULATORS 9
> >
> > +#define LP8720_ENABLE_DELAY 200
> > +#define LP8725_ENABLE_DELAY 30000
> > +
> > enum lp872x_regulator_id {
> > LP8720_ID_BASE,
> > LP8720_ID_LDO1 = LP8720_ID_BASE,
> > @@ -79,12 +82,14 @@ struct lp872x_regulator_data {
> > * @update_config : if LP872X_GENERAL_CFG register is updated, set true
> > * @regulator_data : platform regulator id and init data
> > * @dvs : dvs data for buck voltage control
> > + * @enable_gpio : gpio pin number for enable control
> > */
> > struct lp872x_platform_data {
> > u8 general_config;
> > bool update_config;
> > struct lp872x_regulator_data regulator_data[LP872X_MAX_REGULATORS];
> > struct lp872x_dvs *dvs;
> > + int enable_gpio;
> > };
> >
> > #endif
> >
>
> Best regards,
> Milo

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-02-12 19:41    [W:0.130 / U:0.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site