lkml.org 
[lkml]   [2016]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/8] arm: dts: add Artpec-6 development board dts
Date
Signed-off-by: Lars Persson <larper@axis.com>
---
arch/arm/boot/dts/Makefile | 2 ++
arch/arm/boot/dts/artpec6-devboard.dts | 64 ++++++++++++++++++++++++++++++++++
2 files changed, 66 insertions(+)
create mode 100644 arch/arm/boot/dts/artpec6-devboard.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a4a6d70..2ebe99c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -2,6 +2,8 @@ ifeq ($(CONFIG_OF),y)

dtb-$(CONFIG_ARCH_ALPINE) += \
alpine-db.dtb
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+ artpec6-devboard.dtb
dtb-$(CONFIG_MACH_ASM9260) += \
alphascale-asm9260-devkit.dtb
# Keep at91 dtb files sorted alphabetically for each SoC
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
new file mode 100644
index 0000000..f823ed3
--- /dev/null
+++ b/arch/arm/boot/dts/artpec6-devboard.dts
@@ -0,0 +1,64 @@
+/*
+ * Axis ARTPEC-6 development board.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "artpec6.dtsi"
+
+/ {
+ model = "ARTPEC-6 development board";
+ compatible = "axis,artpec6-dev-board", "axis,artpec6";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x10000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&ethernet {
+ status = "okay";
+
+ phy-handle = <&phy1>;
+ phy-mode = "gmii";
+
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ phy1: phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ device_type = "ethernet-phy";
+ reg = <0x0>;
+ };
+ };
+};
--
2.1.4
\
 
 \ /
  Last update: 2016-02-11 15:21    [W:0.088 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site