lkml.org 
[lkml]   [2016]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 1/8] arm64: dts: qcom: add manual pullup setting to otg.
    Date
    This patch adds manual pull up setting for usb otg indicating that the
    vbus is vbus is not routed to USB controller/phy therefore enables
    pull-up explicitly before starting controller.

    Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
    ---
    arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 +
    1 file changed, 1 insertion(+)

    diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
    index ff7ca44..c1592d4 100644
    --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
    +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
    @@ -399,6 +399,7 @@
    qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
    dr_mode = "peripheral";
    qcom,otg-control = <2>; // PMIC
    + qcom,manual-pullup;

    clocks = <&gcc GCC_USB_HS_AHB_CLK>,
    <&gcc GCC_USB_HS_SYSTEM_CLK>,
    --
    1.9.1
    \
     
     \ /
      Last update: 2016-02-10 13:01    [W:2.569 / U:1.372 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site