lkml.org 
[lkml]   [2016]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V5 4/5] gpio: max77620: add gpio driver for MAX77620/MAX20024
On Fri, 29 Jan 2016, Rob Herring wrote:

> On Wed, Jan 27, 2016 at 07:40:07PM +0530, Laxman Dewangan wrote:
> > MAXIM Semiconductor's PMIC, MAX77620/MAX20024 has 8 GPIO
> > pins. It also supports interrupts from these pins.
> >
> > Add GPIO driver for these pins to control via GPIO APIs.
> >
> > Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
> > Signed-off-by: Chaitanya Bandi <bandik@nvidia.com>
> > ---
> > Changes from V1:
> > - Use the gpiochip_add_data and get the chip data from core APIs.
> > - Cleanups based on comment received on mfd/rtc.
> > - Avoid duplication on error message.
> >
> > Changes form V2:
> > - Run coccicheck and checkpatch in strict mode for the alignment.
> > - update based on api changes from core.
> >
> > Changes from V3:
> > - Change all sys initcall to module driver.
> > - change the max77620_read argument to unisgned int from u8.
> >
> > Changes from V4:
> > - Added DT binding document as devicetree/bindings/gpio/gpio-max77620.txt
> >
> > .../devicetree/bindings/gpio/gpio-max77620.txt | 25 ++
> > drivers/gpio/Kconfig | 9 +
> > drivers/gpio/Makefile | 1 +
> > drivers/gpio/gpio-max77620.c | 292 +++++++++++++++++++++
> > 4 files changed, 327 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/gpio/gpio-max77620.txt
> > create mode 100644 drivers/gpio/gpio-max77620.c
> >
> > diff --git a/Documentation/devicetree/bindings/gpio/gpio-max77620.txt b/Documentation/devicetree/bindings/gpio/gpio-max77620.txt
> > new file mode 100644
> > index 0000000..410e716
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/gpio/gpio-max77620.txt
> > @@ -0,0 +1,25 @@
> > +GPIO driver for MAX77620 Power management IC from Maxim Semiconductor.
> > +
> > +Device has 8 GPIO pins which can be configured as GPIO as well as the
> > +special IO functions.
> > +
> > +Required properties:
> > +-------------------
> > +- gpio-controller : Marks the device node as a gpio controller.
> > +- #gpio-cells : Should be two. The first cell is the pin number and
> > + the second cell is used to specify the gpio polarity:
> > + 0 = active high
> > + 1 = active low
> > +For more details, please refer generic GPIO DT binding document
> > +<devicetree/bindings/gpio/gpio.txt>.
>
> I would just fold these 2 properties into the main max77620 document.

As these are simple/generic options, I'm happy to support that.

Also happy to support them staying in their own subsystem doc
i.e. this one, for consistency.

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-02-01 10:21    [W:0.111 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site