lkml.org 
[lkml]   [2016]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v6 3/8] PWM: add pwm-stm32 DT bindings
    Date
    Define bindings for pwm-stm32

    version 6:
    - change st,breakinput parameter format to make it usuable on stm32f7 too.

    version 2:
    - use parameters instead of compatible of handle the hardware configuration

    Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
    ---
    .../devicetree/bindings/pwm/pwm-stm32.txt | 33 ++++++++++++++++++++++
    1 file changed, 33 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/pwm/pwm-stm32.txt

    diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
    new file mode 100644
    index 0000000..866f222
    --- /dev/null
    +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
    @@ -0,0 +1,33 @@
    +STMicroelectronics STM32 Timers PWM bindings
    +
    +Must be a sub-node of an STM32 Timers device tree node.
    +See ../mfd/stm32-timers.txt for details about the parent node.
    +
    +Required parameters:
    +- compatible: Must be "st,stm32-pwm".
    +- pinctrl-names: Set to "default".
    +- pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module.
    + For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
    +
    +Optional parameters:
    +- st,breakinput: Arrays of three u32 <index level filter> to describe break input configurations.
    + "index" indicates on which break input the configuration should be applied.
    + "level" gives the active level (0=low or 1=high) for this configuration.
    + "filter" gives the filtering value to be applied.
    +
    +Example:
    + timers@40010000 {
    + #address-cells = <1>;
    + #size-cells = <0>;
    + compatible = "st,stm32-timers";
    + reg = <0x40010000 0x400>;
    + clocks = <&rcc 0 160>;
    + clock-names = "clk_int";
    +
    + pwm {
    + compatible = "st,stm32-pwm";
    + pinctrl-0 = <&pwm1_pins>;
    + pinctrl-names = "default";
    + st,breakinput = <0 1 5>;
    + };
    + };
    --
    1.9.1
    \
     
     \ /
      Last update: 2016-12-09 15:18    [W:3.073 / U:0.532 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site