lkml.org 
[lkml]   [2016]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/2] backlight: pwm_bl: Check the PWM state for initial backlight power state
On Tue, 22 Nov 2016, Peter Ujfalusi wrote:

> If the PWM is not enabled the backlight initially should not be enabled
> either if we have booted with DT and there is a phandle pointing to the
> backlight node.
>
> The patch extends the checks to decide if we should keep the backlight off
> initially.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
> Reviewed-by: Thierry Reding <treding@nvidia.com>
> ---
> drivers/video/backlight/pwm_bl.c | 4 ++++
> 1 file changed, 4 insertions(+)

Applied for v4.11, thanks.

> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
> index 5712ddd053dd..d7efcb632f7d 100644
> --- a/drivers/video/backlight/pwm_bl.c
> +++ b/drivers/video/backlight/pwm_bl.c
> @@ -215,6 +215,10 @@ static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb)
> if (!regulator_is_enabled(pb->power_supply))
> return FB_BLANK_POWERDOWN;
>
> + /* The PWM is disabled, keep it like this */
> + if (!pwm_is_enabled(pb->pwm))
> + return FB_BLANK_POWERDOWN;
> +
> return FB_BLANK_UNBLANK;
> }
>

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-12-09 10:12    [W:0.077 / U:1.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site