lkml.org 
[lkml]   [2016]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 5/7] IIO: add bindings for STM32 timer trigger driver
Date
Define bindings for STM32 timer trigger

version 4:
- remove triggers enumeration from DT
- add reg parameter

version 3:
- change file name
- add cross reference with mfd bindings

version 2:
- only keep one compatible
- add DT parameters to set lists of the triggers:
one list describe the triggers created by the device
another one give the triggers accepted by the device

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
.../bindings/iio/timer/stm32-timer-trigger.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt

diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt
new file mode 100644
index 0000000..8c483e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt
@@ -0,0 +1,23 @@
+STMicroelectronics STM32 General Purpose Timer IIO timer bindings
+
+Must be a sub-node of an STM32 General Purpose Timer device tree node.
+See ../mfd/stm32-general-purpose-timer.txt for details about the parent node.
+
+Required parameters:
+- compatible: Must be "st,stm32-timer-trigger".
+- reg: Define triggers configuration of the hardware IP.
+
+Example:
+ timers@40010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-gptimer";
+ reg = <0x40010000 0x400>;
+ clocks = <&rcc 0 160>;
+ clock-names = "clk_int";
+
+ timer@0 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <0>;
+ };
+ };
--
1.9.1
\
 
 \ /
  Last update: 2016-12-08 13:30    [W:0.070 / U:1.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site