lkml.org 
[lkml]   [2016]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/5] Add support for the STM32F4 I2C
Date
This patchset adds support for the I2C controller embedded in STM32F4xx SoC.
It enables I2C transfer in interrupt mode with Standard-mode and Fast-mode bus
speed.

Changes since v3 after Wolfram's review:
- Add COMPILE_TEST flag in Kconfig
- Use correct driver name in Kconfig i.e i2c-stm32f4 instead of i2c-st
- Use more comprehensible name stm32f4_i2c_msg for client specific data
- Don't store reset control node as just needed in probe
- Use clamp() function to test value between 2 ranges
- Use new "i2c_8bit_addr_from_msg() function to build I2C address
- Don't write error messages for timeout
- Remove error message when i2c_add_adapter() fails as it is already handled by
the i2c core driver

M'boumba Cedric Madianga (5):
dt-bindings: Document the STM32 I2C bindings
i2c: Add STM32F4 I2C driver
ARM: dts: Add I2C1 support for STM32F429 SoC
ARM: dts: Add I2C1 support for STM32429 eval board
ARM: configs: Add I2C support for STM32 defconfig

.../devicetree/bindings/i2c/i2c-stm32.txt | 33 +
arch/arm/boot/dts/stm32429i-eval.dts | 6 +
arch/arm/boot/dts/stm32f429.dtsi | 23 +
arch/arm/configs/stm32_defconfig | 3 +
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-stm32f4.c | 857 +++++++++++++++++++++
7 files changed, 933 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-stm32.txt
create mode 100644 drivers/i2c/busses/i2c-stm32f4.c

--
1.9.1

\
 
 \ /
  Last update: 2016-12-07 17:52    [W:0.209 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site