lkml.org 
[lkml]   [2016]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 2/5] ARM: BCM5301X: Specify USB controllers in DT
Date
From: Rafał Miłecki <rafal@milecki.pl>

There are 3 separated controllers, one per USB /standard/. With PHY
drivers in place they can be simply supported with generic drivers.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
V2: Fix node names and reorder ehci with ohci. Thanks Ray!
---
arch/arm/boot/dts/bcm5301x.dtsi | 33 ++++++++++++++++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index f09a2bb..a4614c9 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -248,8 +248,26 @@

#address-cells = <1>;
#size-cells = <1>;
+ ranges;

- phys = <&usb2_phy>;
+ interrupt-parent = <&gic>;
+
+ ehci: ehci@21000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-ehci";
+ reg = <0x00021000 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb2_phy>;
+ };
+
+ ohci: ohci@22000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-ohci";
+ reg = <0x00022000 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ };
};

usb3: usb3@23000 {
@@ -257,6 +275,19 @@

#address-cells = <1>;
#size-cells = <1>;
+ ranges;
+
+ interrupt-parent = <&gic>;
+
+ xhci: xhci@23000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-xhci";
+ reg = <0x00023000 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy>;
+ phy-names = "usb";
+ };
};

spi@29000 {
--
2.10.1
\
 
 \ /
  Last update: 2016-12-07 08:58    [W:0.066 / U:1.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site