lkml.org 
[lkml]   [2016]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 4/4] ata: set ncq_prio_enabled iff device has support
Date
From: Adam Manzanares <adam.manzanares@wdc.com>

We previously had a check to see if the device has support for
prioritized ncq commands and a check to see if a device flag
is set, through a sysfs variable, in order to send a prioritized
command.

This patch only allows the sysfs variable to be set if the device
supports prioritized commands enabling one check in ata_build_rw_tf
in order to determine whether or not to send a prioritized command.

This patch depends on ata: ATA Command Priority Disabled By Default

tj: Minor subject and formatting updates.

Signed-off-by: Adam Manzanares <adam.manzanares@wdc.com>
---
drivers/ata/libata-core.c | 3 +--
drivers/ata/libata-scsi.c | 21 +++++++++++++++------
2 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index f6a631a..324e76e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -787,8 +787,7 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
if (tf->flags & ATA_TFLAG_FUA)
tf->device |= 1 << 7;

- if ((dev->flags & ATA_DFLAG_NCQ_PRIO) &&
- (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE)) {
+ if (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE) {
if (class == IOPRIO_CLASS_RT)
tf->hob_nsect |= ATA_PRIO_HIGH <<
ATA_SHIFT_PRIO;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 328a601..c24cbf1 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -317,17 +317,26 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device,

ap = ata_shost_to_port(sdev->host);

- spin_lock_irqsave(ap->lock, flags);
dev = ata_scsi_find_dev(ap, sdev);
- if (unlikely(!dev)) {
- rc = -ENODEV;
- goto unlock;
+ if (unlikely(!dev))
+ return -ENODEV;
+
+ if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) {
+ if (ata_id_has_ncq_prio(dev->id))
+ ata_dev_config_ncq_prio(dev);
}

- if (input)
+ spin_lock_irqsave(ap->lock, flags);
+ if (input) {
+ if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) {
+ rc = -EOPNOTSUPP;
+ goto unlock;
+ }
+
dev->flags |= ATA_DFLAG_NCQ_PRIO_ENABLE;
- else
+ } else {
dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE;
+ }

unlock:
spin_unlock_irqrestore(ap->lock, flags);
--
2.7.4
\
 
 \ /
  Last update: 2016-12-06 18:34    [W:0.061 / U:0.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site