lkml.org 
[lkml]   [2016]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 7/7] ARM: dts: stm32: add stm32 general purpose timer driver in DT
From
Date
Hi Lee,

On 12/06/2016 10:48 AM, Lee Jones wrote:
> On Mon, 05 Dec 2016, Alexandre Torgue wrote:
>> On 12/02/2016 02:22 PM, Lee Jones wrote:
>>> On Fri, 02 Dec 2016, Benjamin Gaignard wrote:
>>>
>>>> Add general purpose timers and it sub-nodes into DT for stm32f4.
>>>> Define and enable pwm1 and pwm3 for stm32f469 discovery board
>>>>
>>>> version 3:
>>>> - use "st,stm32-timer-trigger" in DT
>>>>
>>>> version 2:
>>>> - use parameters to describe hardware capabilities
>>>> - do not use references for pwm and iio timer subnodes
>>>>
>>>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
>>>> ---
>>>> arch/arm/boot/dts/stm32f429.dtsi | 333 +++++++++++++++++++++++++++++++++-
>>>> arch/arm/boot/dts/stm32f469-disco.dts | 28 +++
>>>> 2 files changed, 360 insertions(+), 1 deletion(-)
>
> [...]
>
> If you're only commenting on a little piece of the patch, it's always
> a good idea to trim the rest.
>
>>>> diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
>>>> index 8a163d7..df4ca7e 100644
>>>> --- a/arch/arm/boot/dts/stm32f469-disco.dts
>>>> +++ b/arch/arm/boot/dts/stm32f469-disco.dts
>>>> @@ -81,3 +81,31 @@
>>>> &usart3 {
>>>> status = "okay";
>>>> };
>>>> +
>>>> +&gptimer1 {
>>>> + status = "okay";
>>>> +
>>>> + pwm1@0 {
>>>> + pinctrl-0 = <&pwm1_pins>;
>>>> + pinctrl-names = "default";
>>>> + status = "okay";
>>>> + };
>>>> +
>>>> + timer1@0 {
>>>> + status = "okay";
>>>> + };
>>>> +};
>>>
>>> This is a much *better* format than before.
>>>
>>> I still don't like the '&' syntax though.
>>
>> Please keep "&" format to match with existing nodes.
>
> Right. I wasn't suggesting that he differs from the current format in
> *this* set. I am suggesting that we change the format in a subsequent
> set though.

Why change? Looking at Linux ARM kernel patchwork, new DT board file
contains this format. Did you already discuss with Arnd or Olof about it
?

regards
Alex

>
>>>> +&gptimer3 {
>>>> + status = "okay";
>>>> +
>>>> + pwm3@0 {
>>>> + pinctrl-0 = <&pwm3_pins>;
>>>> + pinctrl-names = "default";
>>>> + status = "okay";
>>>> + };
>>>> +
>>>> + timer3@0 {
>>>> + status = "okay";
>>>> + };
>>>> +};
>>>
>

\
 
 \ /
  Last update: 2016-12-06 11:00    [W:0.653 / U:0.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site