lkml.org 
[lkml]   [2016]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] usb: host: xhci: Handle the right timeout command
Date
If a command event is found on the event ring during an interrupt,
we need to stop the command timer with del_timer(). Since del_timer()
can fail if the timer is running and waiting on the xHCI lock, then
it maybe get the wrong timeout command in xhci_handle_command_timeout()
if host fetched a new command and updated the xhci->current_cmd in
handle_cmd_completion(). For this situation, we need a way to signal
to the command timer that everything is fine and it should exit.

We should introduce a counter (xhci->current_cmd_pending) for the number
of pending commands. If we need to cancel the command timer and del_timer()
succeeds, we decrement the number of pending commands. If del_timer() fails,
we leave the number of pending commands alone.

For handling timeout command, in xhci_handle_command_timeout() we will check
the counter after decrementing it, if the counter (xhci->current_cmd_pending)
is 0, which means xhci->current_cmd is the right timeout command. If the
counter (xhci->current_cmd_pending) is greater than 0, which means current
timeout command has been handled by host and host has fetched new command as
xhci->current_cmd, then just return and wait for new current command.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
drivers/usb/host/xhci-ring.c | 29 ++++++++++++++++++++++++++++-
drivers/usb/host/xhci.h | 1 +
2 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9965a4c..edc9ac2 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1253,6 +1253,7 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
!(xhci->xhc_state & XHCI_STATE_DYING)) {
xhci->current_cmd = cur_cmd;
+ xhci->current_cmd_pending++;
mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
xhci_ring_cmd_db(xhci);
}
@@ -1269,11 +1270,27 @@ void xhci_handle_command_timeout(unsigned long data)
xhci = (struct xhci_hcd *) data;

spin_lock_irqsave(&xhci->lock, flags);
+ xhci->current_cmd_pending--;
+
if (!xhci->current_cmd) {
spin_unlock_irqrestore(&xhci->lock, flags);
return;
}

+ /*
+ * If the current_cmd_pending is 0, which means current command is
+ * timeout.
+ *
+ * If the current_cmd_pending is greater than 0, which means current
+ * timeout command has been handled by host and host has fetched new
+ * command as xhci->current_cmd, then just return and wait for new
+ * current command.
+ */
+ if (xhci->current_cmd_pending > 0) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return;
+ }
+
if (xhci->current_cmd->status == COMP_CMD_ABORT)
second_timeout = true;
xhci->current_cmd->status = COMP_CMD_ABORT;
@@ -1282,6 +1299,8 @@ void xhci_handle_command_timeout(unsigned long data)
hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
(hw_ring_state & CMD_RING_RUNNING)) {
+ /* Will add command timer again to wait for abort event */
+ xhci->current_cmd_pending++;
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "Command timeout\n");
ret = xhci_abort_cmd_ring(xhci);
@@ -1336,7 +1355,13 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,

cmd = list_entry(xhci->cmd_list.next, struct xhci_command, cmd_list);

- del_timer(&xhci->cmd_timer);
+ /*
+ * If the command timer is running on another CPU, we don't decrement
+ * current_cmd_pending, since we didn't successfully stop the command
+ * timer.
+ */
+ if (del_timer(&xhci->cmd_timer))
+ xhci->current_cmd_pending--;

trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event);

@@ -1427,6 +1452,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
if (cmd->cmd_list.next != &xhci->cmd_list) {
xhci->current_cmd = list_entry(cmd->cmd_list.next,
struct xhci_command, cmd_list);
+ xhci->current_cmd_pending++;
mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
} else if (xhci->current_cmd == cmd) {
xhci->current_cmd = NULL;
@@ -3927,6 +3953,7 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
if (xhci->cmd_list.next == &cmd->cmd_list &&
!timer_pending(&xhci->cmd_timer)) {
xhci->current_cmd = cmd;
+ xhci->current_cmd_pending++;
mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
}

diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 9dbaacf..5d81257 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1567,6 +1567,7 @@ struct xhci_hcd {
unsigned int cmd_ring_reserved_trbs;
struct timer_list cmd_timer;
struct xhci_command *current_cmd;
+ u32 current_cmd_pending;
struct xhci_ring *event_ring;
struct xhci_erst erst;
/* Scratchpad */
--
1.7.9.5
\
 
 \ /
  Last update: 2016-12-05 09:03    [W:0.110 / U:1.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site