lkml.org 
[lkml]   [2016]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH] Input: elantech - Add a special mode for a specific FW The touchapd which sample ver is 0x74 and hw_version is 0x03 have a fw bug which will cause crush sometimes, I add some work-around for it and our customer ask us to upstream the patch Si
Date
Hi Ulrik, Dmitry,

Thanks your comment for the patch.
Please see my reply I the below.

-----Original Message-----
From: Dmitry Torokhov [mailto:dmitry.torokhov@gmail.com]
Sent: Sunday, December 04, 2016 2:48 AM
To: ulrik.debie-os@e2big.org
Cc: KT Liao; linux-kernel@vger.kernel.org; linux-input@vger.kernel.org;
phoenix@emc.com.tw
Subject: Re: [PATCH] Input: elantech - Add a special mode for a specific FW
The touchapd which sample ver is 0x74 and hw_version is 0x03 have a fw bug
which will cause crush sometimes, I add some work-around for it and our
customer ask us to upstream the patch Sig

On Fri, Dec 02, 2016 at 11:05:29PM +0100, ulrik.debie-os@e2big.org wrote:
> Hi,
>
> Thank you for the patch, see below my feedback on your patch.
> Can you provide the contents of fw_verison, capabilities and samples ?
>
> It this fw bug present on multiple laptops ?
>
>
>
> On Fri, Dec 02, 2016 at 01:59:17PM +0800, KT Liao wrote:
> > Date: Fri, 2 Dec 2016 13:59:17 +0800
> > From: KT Liao <kt.liao@emc.com.tw>
> > To: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
> > dmitry.torokhov@gmail.com
> > Cc: phoenix@emc.com.tw, kt.liao@emc.com.tw
> > Subject: [PATCH] Input: elantech - Add a special mode for a specific
> > FW The touchapd which sample ver is 0x74 and hw_version is 0x03
> > have a fw bug which will cause crush sometimes, I add some
> > work-around for it and our customer ask us to upstream the patch
> > Signed-off-by: KT Liao <kt.liao@emc.com.tw>
>
> It seems that the newlines got lost when you used git-send-email. The
> subject should be a oneliner, the remaining part should go to the mail
body.

I think KT forgets to add an empty line between patch subject and body when
committing to their tree.

>
> > X-Mailer: git-send-email 2.7.4
> > X-Mailing-List: linux-input@vger.kernel.org
> >
> > ---
> > drivers/input/mouse/elantech.c | 152
> > +++++++++++++++++++++++++++++++++++------
> > 1 file changed, 131 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/input/mouse/elantech.c
> > b/drivers/input/mouse/elantech.c index db7d1d6..acfe7f2 100644
> > --- a/drivers/input/mouse/elantech.c
> > +++ b/drivers/input/mouse/elantech.c
> > @@ -539,6 +539,30 @@ static void elantech_report_absolute_v3(struct
psmouse *psmouse,
> > input_sync(dev);
> > }
> >
> > +static psmouse_ret_t elantech_report_relative_v3(struct psmouse
> > +*psmouse) {
> > + struct input_dev *dev = psmouse->dev;
> > + unsigned char *packet = psmouse->packet;
> > + int rel_x = 0, rel_y = 0;
> > +
> > + if (psmouse->pktcnt < psmouse->pktsize)
> > + return PSMOUSE_GOOD_DATA;
>
> This is a duplicate of elantech_process_byte and you skipped the
> elantech_packet_dump feature of elantech_process_byte. I think it
> would be better to let elantech_process_byte call this
> elantech_report_relative_v3 just like all the other reportings.
> Is it required to also disable the elantech_packet_check_v3 ?
>
> Can you document the typical packet format for
> elantech_report_relative_v3 ? Something similar to
elantech_report_trackpoint ?
>
>
> > +
> > + input_report_rel(dev, REL_WHEEL, -(signed char)packet[3]);
> > +
> > + rel_x = (int) packet[1] - (int) ((packet[0] << 4) & 0x100);
> > + rel_y = (int) ((packet[0] << 3) & 0x100) - (int) packet[2];
> > +
> > + input_report_key(dev, BTN_LEFT, packet[0] & 1);
> > + input_report_key(dev, BTN_RIGHT, (packet[0] >> 1) & 1);
> > + input_report_rel(dev, REL_X, rel_x);
> > + input_report_rel(dev, REL_Y, rel_y);
> > +
> > + input_sync(dev);
> > +
> > + return PSMOUSE_FULL_PACKET;
> > +}
> > +
> > static void elantech_input_sync_v4(struct psmouse *psmouse) {
> > struct input_dev *dev = psmouse->dev; @@ -696,14 +720,14 @@ static
> > int elantech_packet_check_v1(struct psmouse *psmouse)
> >
> > static int elantech_debounce_check_v2(struct psmouse *psmouse) {
> > - /*
> > - * When we encounter packet that matches this exactly, it means
the
> > - * hardware is in debounce status. Just ignore the whole
packet.
> > - */
> > - const u8 debounce_packet[] = { 0x84, 0xff, 0xff, 0x02, 0xff,
0xff };
> > - unsigned char *packet = psmouse->packet;
> > -
> > - return !memcmp(packet, debounce_packet,
sizeof(debounce_packet));
> > + /*
> > + * When we encounter packet that matches this exactly, it means the
> > + * hardware is in debounce status. Just ignore the whole packet.
> > + */
> > + const u8 debounce_packet[] = { 0x84, 0xff, 0xff, 0x02, 0xff, 0xff };
> > + unsigned char *packet = psmouse->packet;
> > +
> > + return !memcmp(packet, debounce_packet, sizeof(debounce_packet));
> > }
>
> Confirmed, the lines of elantech_debounce_check_v2 do not start with
> tab but spaces, but preferably this will be part of a separate commit.

Yes please.

>
> >
> > static int elantech_packet_check_v2(struct psmouse *psmouse) @@
> > -995,6 +1019,29 @@ static int elantech_set_absolute_mode(struct psmouse
*psmouse)
> > return rc;
> > }
> >
> > +/* it's the work around mode for some touchpad which has FW bug,
> > +but dont' support IAP funciton */
>
> This line is too long, split it across multiple lines.
>
> > +static int elantech_set_special_mode(struct psmouse *psmouse) {
> > + unsigned char param[3];
> > + int rc = 0;
>
> Knowing Dmitry, he would prefer to have error as name instead of rc.
>
> > +
> > + param[0] = 0xc8;
> > + param[1] = 0x64;
> > + param[2] = 0x50;
> > +
> > + if (elantech_ps2_command(psmouse, &param[0], PSMOUSE_CMD_SETRATE) ||
> > + elantech_ps2_command(psmouse, &param[1], PSMOUSE_CMD_SETRATE) ||
> > + elantech_ps2_command(psmouse, &param[2], PSMOUSE_CMD_SETRATE) ||
> > + elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETID)) {
> > + rc = -1;
> > + }
>
> Hm, these do look very similar to intellimouse_detect. Is that a
coincidence ?
>
> > +
> > + psmouse->set_rate(psmouse, 0x64);
> > + psmouse->set_resolution(psmouse, 200);
>
> Why hardcode set_rate and set_resolution when they are already module
> parameters with the defaults exactly the ones selected here.
[KT]: Do you mean psmouse-base driver will do set_rate(psmouse, 0x64) and
set_resolution(psmouse, 200) after mouse reset?

This "special" mode is simply the basic PS/2 mode, right? And the issue is
that this firmware version does not really support absolute mode, at least
not in the form that current driver supports?

If it is really basic PS/2 mode you can simply return "false" from
elantech_init() and we'll reset the mouse and try the basic protocols in
psmouse-base.

[KT]: The patch was created for a specific project two years ago from former
engineer who has resigned.
I have the same question why he mark "absolute mode" and force "relative
mode" command .

I guess there is one reason why he did it.
Maybe the specific FW is default to absolute mode for some reason at first
and I will check FW code later.
I will modify and re-send the patch after I confirm other uncertain issue .

Thanks KT

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2016-12-05 04:37    [W:0.066 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site