lkml.org 
[lkml]   [2016]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] drivers: net: ethernet: 3com: fix return value
Date
In some cases the return value of a failing function is not being used
and the function typhoon_init_one() returns another negative error
code instead.

Signed-off-by: Thomas Preisner <thomas.preisner+linux@fau.de>
Signed-off-by: Milan Stephan <milan.stephan+linux@fau.de>
---
drivers/net/ethernet/3com/typhoon.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/3com/typhoon.c b/drivers/net/ethernet/3com/typhoon.c
index c88b88a..8821a24 100644
--- a/drivers/net/ethernet/3com/typhoon.c
+++ b/drivers/net/ethernet/3com/typhoon.c
@@ -2370,9 +2370,9 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
* 4) Get the hardware address.
* 5) Put the card to sleep.
*/
- if (typhoon_reset(ioaddr, WaitSleep) < 0) {
+ err = typhoon_reset(ioaddr, WaitSleep);
+ if (err < 0) {
err_msg = "could not reset 3XP";
- err = -EIO;
goto error_out_dma;
}

@@ -2386,16 +2386,16 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
typhoon_init_interface(tp);
typhoon_init_rings(tp);

- if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
+ err = typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST);
+ if(err < 0) {
err_msg = "cannot boot 3XP sleep image";
- err = -EIO;
goto error_out_reset;
}

INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_MAC_ADDRESS);
- if(typhoon_issue_command(tp, 1, &xp_cmd, 1, xp_resp) < 0) {
+ err = typhoon_issue_command(tp, 1, &xp_cmd, 1, xp_resp);
+ if(err < 0) {
err_msg = "cannot read MAC address";
- err = -EIO;
goto error_out_reset;
}

@@ -2430,9 +2430,9 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if(xp_resp[0].numDesc != 0)
tp->capabilities |= TYPHOON_WAKEUP_NEEDS_RESET;

- if(typhoon_sleep(tp, PCI_D3hot, 0) < 0) {
+ err = typhoon_sleep(tp, PCI_D3hot, 0);
+ if(err < 0) {
err_msg = "cannot put adapter to sleep";
- err = -EIO;
goto error_out_reset;
}

--
2.7.4
\
 
 \ /
  Last update: 2016-12-24 13:04    [W:0.064 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site