lkml.org 
[lkml]   [2016]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM64: zynqmp: Fix i2c node's compatible string
Date
From: Moritz Fischer <mdf@kernel.org>

The Zynq Ultrascale MP uses version 1.4 of the Cadence IP core
which fixes some silicon bugs that needed software workarounds
in Version 1.0 that was used on Zynq systems.

Signed-off-by: Moritz Fischer <mdf@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Cc: U-Boot List <u-boot@lists.denx.de>
Cc: Rob Herring <robh+dt@kernel.org>
---

Hi Michal,

I think this is a slip up and should be r1p14 for
Ultrascale ZynqMP. drivers/i2c/i2c-cadence.c already uses this.
I Cc'd the u-boot list, because the same change would be required there.

Cheers,

Moritz

---
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 68a90833..a5a5f91 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -175,7 +175,7 @@
};

i2c0: i2c@ff020000 {
- compatible = "cdns,i2c-r1p10";
+ compatible = "cdns,i2c-r1p14";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 17 4>;
@@ -185,7 +185,7 @@
};

i2c1: i2c@ff030000 {
- compatible = "cdns,i2c-r1p10";
+ compatible = "cdns,i2c-r1p14";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 18 4>;
--
2.4.11
\
 
 \ /
  Last update: 2016-12-22 06:51    [W:0.088 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site