lkml.org 
[lkml]   [2016]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_*
Date
Current there is both "EXTCON_USB" and "EXTCON_CHG_USB_SDP" which
both seem to suggest a standard downstream port. But there is no
documentation describing how these relate.

Thus add documentation to describe EXTCON_CHG_USB_SDP should always
appear together with EXTCON_USB, and EXTCON_CHG_USB_ACA would normally
appear with EXTCON_USB_HOST.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
include/linux/extcon.h | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index b871c0c..6498b05 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -46,7 +46,14 @@
#define EXTCON_USB 1
#define EXTCON_USB_HOST 2

-/* Charging external connector */
+/*
+ * Charging external connector
+ *
+ * When one SDP charger connector was reported, we should also report
+ * the USB connector, which means EXTCON_CHG_USB_SDP should always
+ * appear together with EXTCON_USB. The same as ACA charger connector,
+ * EXTCON_CHG_USB_ACA should always appear with EXTCON_USB_HOST.
+ */
#define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */
#define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */
#define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */
--
1.7.9.5
\
 
 \ /
  Last update: 2016-12-21 07:12    [W:0.458 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site