lkml.org 
[lkml]   [2016]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RFT] usb: dwc2: gadget: Fix fifo size configuration
Hi Sevak,

> Sevak Arakelyan <SEVAK.ARAKELYAN@synopsys.com> hat am 20. Dezember 2016 um 13:57 geschrieben:
>
>
> On 12/19/2016 8:39 PM, Stefan Wahren wrote:
> > Currently the upper limit for the endpoint index during fifo size
> > config was always 16 instead of the available endpoints. So fix this
> > by using the determined amount of endpoints and avoid a warning about
> > "insufficient fifo memory" on bcm2835 which has only 8 endpoints.
> >
> > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> > Fixes: 0a176279db68 ("usb: dwc2: gadget: configure fifos from device tree")
> > ---
> > drivers/usb/dwc2/gadget.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > Since revert of ("usb: dwc2: gadget: fix TX FIFO size and address") which
> > caused regressions on some platforms this is the second attempt to fix
> > gadget support for bcm2835.
> >
> > diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> > index b95930f..b00184c 100644
> > --- a/drivers/usb/dwc2/gadget.c
> > +++ b/drivers/usb/dwc2/gadget.c
> > @@ -228,7 +228,7 @@ static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
> > * them to endpoints dynamically according to maxpacket size value of
> > * given endpoint.
> > */
> > - for (ep = 1; ep < MAX_EPS_CHANNELS; ep++) {
> > + for (ep = 1; ep < hsotg->num_of_eps; ep++) {
> > if (!txfsz[ep])
> > continue;
> > val = addr;
>
> Hi Stefan,
>
> This patch is only temporary, not full solution for bcm2835 and in
> the loop you need to use hsotg->num_of_eps in shared FIFO mode and the
> number of device IN EPs which is in GHWCFG4 with mask
> GHWCFG4_NUM_IN_EPS_MASK in dedicated FIFO mode.

i don't have any documentation for this. So i tried to fix this obviously error.

>
> The upper limit is up to 15 but the actual number of FIFOa are being
> configured according to the given legacy array
> DWC2_G_P_LEGACY_TX_FIFO_SIZE {256, 256, 256, 256, 768, 768, 768, 768, 0,
> 0, 0, 0, 0, 0, 0}, in that case it is 8 FIFOs. The legacy values are the
> main issue. We must do correct calculation according to FIFO operation
> mode, device operation mode, take into consideration the EP Info Block
> which must be at the end of total FIFO and after that configure correct
> number of FIFOs with correct size of depth on every setup. We prepared a
> patch series to fix that issue and it is under internal review and
> testing process and will be submitted soon.

I wanted to avoid this by providing the TX FIFO sizes via DT [1].

Sorry for my impatience.

[1] - https://github.com/lategoodbye/rpi-zero/commit/a6ec75dd8ea6a7ce0609ae082d3fa748beaba22c

>
> Thanks,
> Sevak
>

\
 
 \ /
  Last update: 2016-12-20 15:20    [W:0.055 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site