lkml.org 
[lkml]   [2016]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 6/7] thunderbolt: Power down controller when idle
On Mon, Dec 19, 2016 at 01:05:10AM +0200, Andy Shevchenko wrote:
> On Sat, Dec 17, 2016 at 4:39 PM, Lukas Wunner <lukas@wunner.de> wrote:
> > Document and implement Apple's ACPI-based (but nonstandard) pm mechanism
> > for Thunderbolt. Briefly, an ACPI method provided by Apple is used to
> > cut power to the controller. A GPE is enabled while the controller is
> > powered down which sideband-signals a plug event, whereupon we reinstate
> > power using the ACPI method.
> >
> > This saves 1.7 W on machines with a Light Ridge controller and is
> > reported to save 4 W on Cactus Ridge 4C and Falcon Ridge 4C. (I believe
> > 4 W includes the bus power drawn by Apple's Gigabit Ethernet adapter.)
> > It fixes (at least partially) a power regression introduced in 3.17 by
> > commit 7bc5a2bad0b8 ("ACPI: Support _OSI("Darwin") correctly").
> >
>
> > +++ b/drivers/thunderbolt/power.c
> > @@ -0,0 +1,347 @@
>
> > +#include <linux/delay.h>
> > +#include <linux/pci.h>
> > +#include <linux/pm_runtime.h>
> > +
> > +#include "power.h"
> > +
>
> > +#ifdef pr_fmt
> > +#undef pr_fmt
> > +#endif
> > +#define pr_fmt(fmt) KBUILD_MODNAME " %s: " fmt, dev_name(dev)
>
> Perhaps just define pr_fmt before any other include?
> We have such check where actually default pr_fmt is defined. No need
> to duplicate.

If I put the '#define pr_fmt(fmt)' line above all includes, I get:

include/linux/ratelimit.h: In function 'ratelimit_state_exit':
drivers/thunderbolt/power.c:93:49: error: implicit declaration of function 'dev_name'

This is caused by 6b1d174b0c27 which was introduced this August.


If I try to solve this by including <linux/device.h> before the
'#define pr_fmt(fmt)' line, I get:

drivers/thunderbolt/power.c:95:0: warning: "pr_fmt" redefined
#define pr_fmt(fmt) KBUILD_MODNAME " %s: " fmt, dev_name(dev)
^
In file included from /root/kernel/linux/include/linux/kernel.h:13:0,
from /root/kernel/linux/include/linux/list.h:8,
from /root/kernel/linux/include/linux/kobject.h:20,
from /root/kernel/linux/include/linux/device.h:17,
from /root/kernel/linux/drivers/thunderbolt/power.c:93:
include/linux/printk.h:260:0: note: this is the location of the previous definition
#define pr_fmt(fmt) fmt
^


So it seems there's no alternative to the '#undef pr_fmt'.


> > + /* prevent interrupts during system sleep transition */
> > + if (ACPI_FAILURE(acpi_disable_gpe(NULL, power->wake_gpe))) {
> > + pr_err("cannot disable wake GPE, resuming\n");
>
> dev_err?

This is intentionally pr_err for cosmetic reasons. :-)

With dev_err it would look like this in dmesg:

pcieport 0000:05:00.0: cannot disable wake GPE, resuming

With pr_err it looks like this:

thunderbolt 0000:05:00.0: cannot disable wake GPE, resuming

Thus, someone grepping for this error message will get a hint that
they have to look in drivers/thunderbolt/ rather than drivers/pci/pcie/.

The code of this PM callback is located in the thunderbolt driver,
which binds to the NHI, 0000:07:00.0. But the PM callback is
assigned to the upstream bridge, which is the grandparent of the NHI,
0000:05:00.0. The pr_fmt is crafted such that the KBUILD_MODNAME
("thunderbolt") is logged rather than "pcieport". So I use pr_*
in the PM callbacks assigned to the upstream bridge and dev_*
in thunderbolt_power_init() / _fini() (which is executed in the
context of the NHI).

This is also much nicer for end users looking at dmesg. E.g. when
the chip is suspended, it looks like this:

thunderbolt 0000:07:00.0: suspending...
thunderbolt 0000:07:00.0: stopping RX ring 0
thunderbolt 0000:07:00.0: disabling interrupt at register 0x38204 bit 0 (0x1 -> 0x0)
thunderbolt 0000:07:00.0: stopping TX ring 0
thunderbolt 0000:07:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
thunderbolt 0000:07:00.0: control channel stopped
thunderbolt 0000:07:00.0: suspend finished
thunderbolt 0000:05:00.0: powering down

It would be confusing for end users if it would say here that
the pcieport is powering down.


> > + /*
> > + * On gen 2 controllers, the wake GPE fires as long as the controller
> > + * is powered up. Poll until it's powered down before enabling the GPE.
> > + */
> > + for (i = 0; i < 300; i++) {
>
> 300 is magic.
[...]
> Why 800? Perhaps comment on this.

We mimic the behaviour of the macOS driver here which polls up to
300 times with a 1 ms delay. I've now extended the comment above
in my working branch to explain this.


> > +err:
>
> err_resume: ?

Ok.


> > +err:
>
> err_free: ?

Ok.


> > +void thunderbolt_power_fini(struct tb *tb)
> > +{
> > + struct device *nhi_dev = &tb->nhi->pdev->dev;
> > + struct device *upstream_dev = nhi_dev->parent->parent;
> > + struct tb_power *power = tb->power;
> > +
>
> > + if (!power)
> > + return;
>
> Would be the case?

That would be the case if thunderbolt_power_init() failed, then we
have to skip removing the GPE handler and all that. I've now added
a comment to explain this.

I've also discovered and fixed a bug in thunderbolt_power_init(),
in the "cannot find upstream bridge" error path I have to remove
the GPE handler.

I'll wait a bit if there's further feedback and will post a
rectified version probably next week, after the merge window
has closed.

Thanks!

Lukas

\
 
 \ /
  Last update: 2016-12-20 12:29    [W:0.060 / U:1.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site