lkml.org 
[lkml]   [2016]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Input: mouse: synaptics - change msleep to usleep_range for small msecs
On Sun, Dec 18, 2016 at 09:35:48AM +0200, Igor Grinberg wrote:
> Hi Aniroop Mathur,
>
>
> On 12/04/16 15:05, Aniroop Mathur wrote:
> > Hello Mr. Igor Grinberg
> >
> > On Sun, Dec 4, 2016 at 1:32 PM, Igor Grinberg <grinberg@compulab.co.il> wrote:
> >> Hi Aniroop Mathur,
> >>
> >> On 11/29/16 23:02, Aniroop Mathur wrote:
> >>> Dear Mike Rapoport, Igor Grinberg,
> >>> Greetings!
> >>>
> >>> I am Aniroop Mathur from Samsung R&D Institute, India.
> >>>
> >>> I have submitted one patch as below for review to Linux Open Source.
> >>> The problem is that we do not have the hardware available with us to
> >>> test it and we would like to test it before actually applying it.
> >>> As you are the author of this driver, I am contacting you to request you
> >>> provide your feedback upon this patch.
> >>>
> >>> Also if you have the hardware available, could you please help to
> >>> test this patch on your hardware? or could you provide contact points
> >>> of individuals who could support to test it?
> >>
> >> This touchpad and the driver was used on an old PXA270 based PDA.
> >> I currently don't have those at hand to test the patch.
> >>
> >>>
> >>> Thank you!
> >>>
> >>> BR,
> >>> Aniroop Mathur
> >>>
> >>> On Tue, Nov 29, 2016 at 1:25 AM, Aniroop Mathur <a.mathur@samsung.com> wrote:
> >>>> msleep(1~20) may not do what the caller intends, and will often sleep longer.
> >>>> (~20 ms actual sleep for any value given in the 1~20ms range)
> >>
> >> Well, it should be at least 1ms as stated in my comment just before the define.
> >> So, from the correctness perspective larger values will also do the job.
> >> Additionally, since I've taken a spare 2ms, and you are making it even more
> >> precise (3000us + 100us) - it will still do the job and stay correct.
> >> So, there should be no issue from correctness POV.
> >>
> >
> > Alright, Thanks!
> >
> >>>> This is not the desired behaviour for many cases like device resume time,
> >>>> device suspend time, device enable time, retry logic, etc.
> >>>> Thus, change msleep to usleep_range for precise wakeups.
> >>
> >> This is a human interface touchpad device, even having 20ms soft reset
> >> sleep time will not impact the responsiveness for humans.
> >> IMHO, there is no need for precise wakeups for this device, so I wouldn't
> >> bother.
> >>
> >
> > Well, from the point of view of device working and responsiveness for "humans",
> > I agree that it is okay to sleep for 20 / 40 ms or even 100 ms. However, this
> > patch is not trying to solve any such issues. This patch is only trying to make
> > the process sleep for appropriate time as mentioned in the parameter and does
> > not cause any harm here. I could see that this function is called during device
> > resume and device probe time. So this change will improve the resume and probe
> > time for this device and doing the same change in other drivers will
> > contribute to
> > improvement in overall kernel resume and boot time a little bit so response time
> > increases a little bit. Plus, it is recommended and mentioned in kernel
> > documentation to use usleep_range for delays between 1-10 ms.
> > So usleep_range should serve better here.
> > Explained originally here to why not use msleep for 1 - 20 ms:
> > http://lkml.org/lkml/2007/8/3/250
>
> I have absolutely 0 objections to this.
> So, as I already have said, it will be hard for me to test it currently, but
> if you want it and Dmitry wants to apply it, my ack is below.

OK, it does not matter much either way, but let's apply it.

>
> >>>>
> >>>> Signed-off-by: Aniroop Mathur <a.mathur@samsung.com>
>
> Acked-by: Igor Grinberg <grinberg@compulab.co.il>

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2016-12-19 00:30    [W:0.056 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site