lkml.org 
[lkml]   [2016]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V4] i2c: designware: fix wrong Tx/Rx FIFO for ACPI
Date
ACPI always sets Tx/Rx FIFO to 32. This configuration will
cause problem if the IP core supports a FIFO size of less than 32.
The driver should read the FIFO size from the IP and select the smaller
one of the two.

Signed-off-by: Tin Huynh <tnhuynh@apm.com>

---
drivers/i2c/busses/i2c-designware-platdrv.c | 27 ++++++++++++++++++++-------
1 files changed, 20 insertions(+), 7 deletions(-)

Change from V3:
-Use uppercase of FIFO instead of lowercase.
-Fix the problem when IP core return 0 of FIFO.

Change from V2:
-Add a helper function to set FIFO size.

Change from V1:
-Revert the default 32 for FIFO, read parameter from IP core
and pick the smaller one of the two.
-Correct the title to describe new approach.

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 0b42a12..24032d6 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -150,6 +150,25 @@ static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare)
return 0;
}

+static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev, int id)
+{
+ u32 param, tx_fifo_depth, rx_fifo_depth;
+
+ param = i2c_dw_read_comp_param(dev);
+ tx_fifo_depth = ((param >> 16) & 0xff) + 1;
+ rx_fifo_depth = ((param >> 8) & 0xff) + 1;
+ if (!dev->tx_fifo_depth) {
+ dev->tx_fifo_depth = tx_fifo_depth;
+ dev->rx_fifo_depth = rx_fifo_depth;
+ dev->adapter.nr = id;
+ } else if (tx_fifo_depth > 1) {
+ dev->tx_fifo_depth = min_t(u32, dev->tx_fifo_depth,
+ tx_fifo_depth);
+ dev->rx_fifo_depth = min_t(u32, dev->rx_fifo_depth,
+ rx_fifo_depth);
+ }
+}
+
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -246,13 +265,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
1000000);
}

- if (!dev->tx_fifo_depth) {
- u32 param1 = i2c_dw_read_comp_param(dev);
-
- dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
- dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1;
- dev->adapter.nr = pdev->id;
- }
+ dw_i2c_set_fifo_size(dev, pdev->id);

adap = &dev->adapter;
adap->owner = THIS_MODULE;
--
1.7.1
\
 
 \ /
  Last update: 2016-12-13 11:04    [W:0.075 / U:0.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site