lkml.org 
[lkml]   [2016]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] PCI/ACPI: xgene: Add ECAM quirk for X-Gene PCIe controller
On Thu, Dec 01, 2016 at 02:20:53PM -0500, Mark Salter wrote:
> On Thu, 2016-12-01 at 12:33 -0600, Bjorn Helgaas wrote:
> > On Wed, Nov 30, 2016 at 03:42:53PM -0800, Duc Dang wrote:

> > > +static struct resource xgene_v1_csr_res[] = {
> > > + [0] = DEFINE_RES_MEM_NAMED(0x1f2b0000UL, SZ_64K, "PCIe CSR"),
> > > + [1] = DEFINE_RES_MEM_NAMED(0x1f2c0000UL, SZ_64K, "PCIe CSR"),
> > > + [2] = DEFINE_RES_MEM_NAMED(0x1f2d0000UL, SZ_64K, "PCIe CSR"),
> > > + [3] = DEFINE_RES_MEM_NAMED(0x1f500000UL, SZ_64K, "PCIe CSR"),
> > > + [4] = DEFINE_RES_MEM_NAMED(0x1f510000UL, SZ_64K, "PCIe CSR"),
> > I assume these ranges are not the actual ECAM space, right?
> > If they *were* ECAM, I assume you would have included them in the
> > quirk itself in the mcfg_quirks[] table.
>
> These are base addresses for some RC mmio registers.
> >
> > >
> > > +static int xgene_v1_pcie_ecam_init(struct pci_config_window *cfg)
> > > +{
> > > + struct acpi_device *adev = to_acpi_device(cfg->parent);
> > > + struct acpi_pci_root *root = acpi_driver_data(adev);
> > > + struct device *dev = cfg->parent;
> > > + struct xgene_pcie_port *port;
> > > + struct resource *csr;
> > > +
> > > + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
> > > + if (!port)
> > > + return -ENOMEM;
> > > +
> > > + csr = &xgene_v1_csr_res[root->segment];
> > This makes me nervous because root->segment comes from the ACPI _SEG,
> > and if firmware gives us junk in _SEG, we will reference something in
> > the weeds.
>
> The SoC provide some number of RC bridges, each with a different base
> for some mmio registers. Even if segment is legitimate in MCFG, there
> is still a problem if a platform doesn't use the segment ordering
> implied by the code. But the PNP0A03 _CRS does have this base address
> as the first memory resource, so we could get it from there and not
> have hard-coded addresses and implied ording in the quirk code.

I'm confused. Doesn't the current code treat every item in PNP0A03
_CRS as a window? Do you mean the first resource is handled
differently somehow? The Consumer/Producer bit could allow us to do
this by marking the RC MMIO space as "Consumer", but I didn't think
that strategy was quite working yet.

> I have tested a modified version of these quirks using this to
> get the CSR base and it works on the 3 different platforms I have
> access to.
>
> static int xgene_pcie_get_csr(struct device *dev, struct resource *r)
> {
> struct acpi_device *adev = to_acpi_device(dev);
> unsigned long flags;
> struct list_head list;
> struct resource_entry *entry;
> int ret;
>
> INIT_LIST_HEAD(&list);
> flags = IORESOURCE_MEM;
> ret = acpi_dev_get_resources(adev, &list,
>      acpi_dev_filter_resource_type_cb,
>      (void *)flags);
> if (ret < 0) {
> dev_err(dev, "failed to parse _CRS, error: %d\n", ret);
> return ret;
> } else if (ret == 0) {
> dev_err(dev, "no memory resources present in _CRS\n");
> return -EINVAL;
> }
>
> entry = list_first_entry(&list, struct resource_entry, node);
> *r = *entry->res;
> acpi_dev_free_resource_list(&list);
> return 0;
> }

The code above is identical to acpi_get_rc_addr(), which is used in
the acpi_get_rc_resources() path by the other quirks. Can you use
that path, too, instead of reimplementing it here?

\
 
 \ /
  Last update: 2016-12-01 20:42    [W:0.142 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site