lkml.org 
[lkml]   [2016]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] e1000e: free IRQ regardless of __E1000_DOWN
Date
Move IRQ free code so that it will happen regardless of the
__E1000_DOWN bit. Currently the e1000e driver only releases its IRQ
if the __E1000_DOWN bit is cleared. This is not sufficient because
it is possible for __E1000_DOWN to be set without releasing the IRQ.
In such a situation, we will hit a kernel bug later in e1000_remove
because the IRQ still has action since it was never freed. A
secondary bus reset can cause this case to happen.

Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 7017281..36cfcb0 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -4679,12 +4679,13 @@ int e1000e_close(struct net_device *netdev)

if (!test_bit(__E1000_DOWN, &adapter->state)) {
e1000e_down(adapter, true);
- e1000_free_irq(adapter);

/* Link status message must follow this format */
pr_info("%s NIC Link is Down\n", adapter->netdev->name);
}

+ e1000_free_irq(adapter);
+
napi_disable(&adapter->napi);

e1000e_free_tx_resources(adapter->tx_ring);
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
\
 
 \ /
  Last update: 2016-11-09 22:41    [W:0.149 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site