lkml.org 
[lkml]   [2016]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC] PCI: Fix kernel panic of root-port-less PCIe enum due to ASPM
Hi Serge,

On Thu, Oct 06, 2016 at 12:34:15PM +0300, Serge Semin wrote:
> Hello linux folks,
>
> Sometime ago I discovered a kernel panic popping up when PCI subsystem was
> trying to enumerate PCI express bus with ASPM service enabled. Here it is:
>
> [ 5.089667] CPU 0 Unable to handle kernel paging request at virtual
> address 00000060, epc == 80317004, ra == 80316ac8
> [ 5.120952] Oops[#1]:
> ...
> [ 5.528438] Call Trace:
> [ 5.535640] [<80317004>] pcie_aspm_init_link_state+0x6c0/0x814
> [ 5.552843] [<80300c44>] pci_scan_slot+0x140/0x148
> [ 5.566957] [<80301dcc>] pci_scan_child_bus+0x50/0x1b0
> [ 5.582096] [<80301944>] pci_scan_bridge+0x25c/0x694
> [ 5.596724] [<80301e78>] pci_scan_child_bus+0xfc/0x1b0
> [ 5.611862] [<80301944>] pci_scan_bridge+0x25c/0x694
> [ 5.626488] [<80301e78>] pci_scan_child_bus+0xfc/0x1b0
> [ 5.641628] [<8030215c>] pci_scan_root_bus+0x64/0x124
> [ 5.656528] [<804ca298>] pcibios_scanbus+0xa8/0x188
>
> I more than sure you are familiar with the issue, since I've found the
> mailing discussion: "PCI: avoid NULL deref in alloc_pcie_link_state"
> https://patchwork.kernel.org/patch/2751651/
> https://bugzilla.kernel.org/show_bug.cgi?id=60111

I'm trying to puzzle out a few things here. Maybe you can help me out?

- Does this issue exist in current upstream kernels? Your dmesg shows a
v3.19-based kernel. c8fc9339409d ("PCI/ASPM: Use dev->has_secondary_link
to find downstream links"), which appeared in v4.2, fixes a problem very
similar to what you're reporting.

- When we dereference the NULL pointer, which device did we call
pcie_aspm_init_link_state() for?

- https://bugzilla.kernel.org/attachment.cgi?id=240981 is the failing dmesg
log, and it shows "vgaarb: device added: PCI:0000:04:00.0".

Your lspci output (https://bugzilla.kernel.org/attachment.cgi?id=241001)
shows 04:00.0 is a downstream port, but vga_arbiter_add_pci_device() only
prints that message for VGA class devices.

https://bugzilla.kernel.org/attachment.cgi?id=240991, the successful
dmesg log, shows "vgaarb: device added: PCI:0000:06:00.0". That makes
more sense because 06:00.0 is class 0300, which is a VGA device.

Bjorn

\
 
 \ /
  Last update: 2016-11-09 00:31    [W:0.057 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site