lkml.org 
[lkml]   [2016]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 4/4] KVM: x86: emulate FXSAVE and FXRSTOR
From
Date


On 08/11/2016 20:54, Radim Krčmář wrote:
> Internal errors were reported on 16 bit fxsave and fxrstor with ipxe.
> Old Intels don't have unrestricted_guest, so we have to emulate them.
>
> The patch takes advantage of the hardware implementation.
>
> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
> ---
> v3:
> - remove fxsave64 and extra colons at the end of asm to make old GCCs
> happy (fxsave64 could have been implemented using other nmemonics,
> but there is no point when it won't be used + removing it makes the
> code nicer.)
> v2:
> - throws #GP to the guest when reserved MXCSR are set [Nadav]
> - returns internal emulation error if an exception is hit during
> execution
> - preserves XMM 8-15
> ---
> arch/x86/kvm/emulate.c | 113 ++++++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 112 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
> index 6af3cac6ec89..1b3fab1fb8d3 100644
> --- a/arch/x86/kvm/emulate.c
> +++ b/arch/x86/kvm/emulate.c
> @@ -3883,6 +3883,115 @@ static int em_movsxd(struct x86_emulate_ctxt *ctxt)
> return X86EMUL_CONTINUE;
> }
>
> +static int check_fxsr(struct x86_emulate_ctxt *ctxt)
> +{
> + u32 eax = 1, ebx, ecx = 0, edx;
> +
> + ctxt->ops->get_cpuid(ctxt, &eax, &ebx, &ecx, &edx);
> + if (!(edx & FFL(FXSR)))
> + return emulate_ud(ctxt);
> +
> + if (ctxt->ops->get_cr(ctxt, 0) & (X86_CR0_TS | X86_CR0_EM))
> + return emulate_nm(ctxt);
> +
> + /*
> + * Don't emulate a case that should never be hit, instead of working
> + * around a lack of fxsave64/fxrstor64 on old compilers.
> + */
> + if (ctxt->mode >= X86EMUL_MODE_PROT64)
> + return X86EMUL_UNHANDLEABLE;
> +
> + return X86EMUL_CONTINUE;
> +}
> +
> +/*
> + * FXSAVE and FXRSTOR have 4 different formats depending on execution mode,
> + * 1) 16 bit mode
> + * 2) 32 bit mode
> + * - like (1), but FIP and FDP (foo) are only 16 bit. At least Intel CPUs
> + * preserve whole 32 bit values, though, so (1) and (2) are the same wrt.
> + * save and restore
> + * 3) 64-bit mode with REX.W prefix
> + * - like (2), but XMM 8-15 are being saved and restored
> + * 4) 64-bit mode without REX.W prefix
> + * - like (3), but FIP and FDP are 64 bit
> + *
> + * Emulation uses (3) for (1) and (2) and preserves XMM 8-15 to reach the
> + * desired result. (4) is not emulated.
> + *
> + * XXX: Guest and host CPUID.(EAX=07H,ECX=0H):EBX[bit 13] (deprecate FPU CS
> + * and FPU DS) should match.
> + */
> +static int em_fxsave(struct x86_emulate_ctxt *ctxt)
> +{
> + struct fxregs_state fx_state;
> + size_t size = 288; /* up to XMM7 */

Sorry for noticing this only now; if CR4.OSFXSR is 0, XMM and MXCSR
should not be saved.

I can apply the first three patches already if you prefer.

Paolo

> + int rc;
> +
> + rc = check_fxsr(ctxt);
> + if (rc != X86EMUL_CONTINUE)
> + return rc;
> +
> + ctxt->ops->get_fpu(ctxt);
> +
> + rc = asm_safe("fxsave %[fx]", , [fx] "+m"(fx_state));
> +
> + ctxt->ops->put_fpu(ctxt);
> +
> + if (rc != X86EMUL_CONTINUE)
> + return rc;
> +
> + return segmented_write(ctxt, ctxt->memop.addr.mem, &fx_state, size);
> +}
> +
> +static int fx_load_64bit_xmm(struct fxregs_state *new)
> +{
> + int rc = X86EMUL_CONTINUE;
> +#ifdef CONFIG_X86_64
> + struct fxregs_state old;
> +
> + rc = asm_safe("fxsave %[fx]", , [fx] "+m"(old));
> +
> + /* XXX: accessing XMM 8-15 is very awkward */
> + memcpy(&new->xmm_space[8*16 / 4], &old.xmm_space[8*16 / 4], 8*16);
> +#endif
> + return rc;
> +}
> +
> +static int em_fxrstor(struct x86_emulate_ctxt *ctxt)
> +{
> + struct fxregs_state fx_state;
> + int rc;
> +
> + rc = check_fxsr(ctxt);
> + if (rc != X86EMUL_CONTINUE)
> + return rc;
> +
> + rc = segmented_read(ctxt, ctxt->memop.addr.mem, &fx_state, 512);
> + if (rc != X86EMUL_CONTINUE)
> + return rc;
> +
> + if (fx_state.mxcsr >> 16)
> + return emulate_gp(ctxt, 0);
> +
> + ctxt->ops->get_fpu(ctxt);
> +
> + /*
> + * 64 bit host will always restore XMM8-15, which is not correct on
> + * non-64 bit guests. Load the current values in order to preserve 64
> + * bit XMMs after fxrstor.
> + */
> + if (ctxt->mode < X86EMUL_MODE_PROT64)
> + rc = fx_load_64bit_xmm(&fx_state);
> +
> + if (rc == X86EMUL_CONTINUE)
> + rc = asm_safe("fxrstor %[fx]", : [fx] "m"(fx_state));
> +
> + ctxt->ops->put_fpu(ctxt);
> +
> + return rc;
> +}
> +
> static bool valid_cr(int nr)
> {
> switch (nr) {
> @@ -4235,7 +4344,9 @@ static const struct gprefix pfx_0f_ae_7 = {
> };
>
> static const struct group_dual group15 = { {
> - N, N, N, N, N, N, N, GP(0, &pfx_0f_ae_7),
> + I(ModRM | Aligned16, em_fxsave),
> + I(ModRM | Aligned16, em_fxrstor),
> + N, N, N, N, N, GP(0, &pfx_0f_ae_7),
> }, {
> N, N, N, N, N, N, N, N,
> } };
>

\
 
 \ /
  Last update: 2016-11-09 00:26    [W:0.091 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site