Messages in this thread | | | Date | Tue, 8 Nov 2016 16:13:31 +0000 | From | Russell King - ARM Linux <> | Subject | Re: [PATCH 0/8] firmware: arm_scpi: add support for legacy SCPI protocol |
| |
On Tue, Nov 08, 2016 at 04:08:38PM +0000, Sudeep Holla wrote: > I will focus on this and see what's happening. I have issue with network > on my setup with debug build and Linaro guys are not seeing it. I revert > to release build of UEFI for that. Anyways one suggestion I have right > now is to erase the second partition of NOR flash where the old UEFI > config is placed and it could be conflicting with the new UEFI image. > > Cmd> flash > > > Switching on main power... > PMIC RAM configuration (pms_v105.bin)... > IOFPGA config: PASSED > Enabling usb remote... > > > Flash> ERASERANGE 0x0BFC0000 0x0BFF0000 > > I will looking into that further.
Still behaves the same, stopping at:
FV2 Hob 0xFE07B000 - 0xFE8253BF
-- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net.
| |