lkml.org 
[lkml]   [2016]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/3] ARM: gr8: evb: Add i2s codec
On Tue, Nov 8, 2016 at 3:44 PM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> On Mon, Nov 07, 2016 at 10:11:45PM +0800, Chen-Yu Tsai wrote:
>> On Mon, Nov 7, 2016 at 9:08 PM, Maxime Ripard
>> <maxime.ripard@free-electrons.com> wrote:
>> > The GR8-EVB comes with a wm8978 codec connected to the i2s bus.
>> >
>> > Add a card in order to have it working
>> >
>> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
>> > ---
>> > arch/arm/boot/dts/ntc-gr8-evb.dts | 14 ++++++++++++++
>> > 1 file changed, 14 insertions(+), 0 deletions(-)
>> >
>> > diff --git a/arch/arm/boot/dts/ntc-gr8-evb.dts b/arch/arm/boot/dts/ntc-gr8-evb.dts
>> > index 12b4317a4383..5291e425caf9 100644
>> > --- a/arch/arm/boot/dts/ntc-gr8-evb.dts
>> > +++ b/arch/arm/boot/dts/ntc-gr8-evb.dts
>> > @@ -76,6 +76,20 @@
>> > default-brightness-level = <8>;
>> > };
>> >
>> > + i2s {
>>
>> "sound" might be a better node name? The I2S controllers are also
>> named "i2s".
>
> I know, but we also had the codec and SPDIF on this board, so sound
> was too generic to be meaningful I guess. I don't really care about
> the name though, if you have any suggestion...

Well people seem to use "sound" for the sound card nodes...

What about "sound-analog" for this one, and "sound-spdif" for the
SPDIF simple card? Or "analog-sound" and "spdif-sound" if that looks
better.


ChenYu

>> Otherwise,
>>
>> Acked-by: Chen-Yu Tsai <wens@csie.org>
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

\
 
 \ /
  Last update: 2016-11-08 08:58    [W:0.047 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site