lkml.org 
[lkml]   [2016]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.12 09/72] gpio: mpc8xxx: Correct irq handler function
Date
From: Liu Gang <Gang.Liu@nxp.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit d71cf15b865bdd45925f7b094d169aaabd705145 upstream.

From the beginning of the gpio-mpc8xxx.c, the "handle_level_irq"
has being used to handle GPIO interrupts in the PowerPC/Layerscape
platforms. But actually, almost all PowerPC/Layerscape platforms
assert an interrupt request upon either a high-to-low change or
any change on the state of the signal.

So the "handle_level_irq" is not reasonable for PowerPC/Layerscape
GPIO interrupt, it should be "handle_edge_irq". Otherwise the system
may lost some interrupts from the PIN's state changes.

Signed-off-by: Liu Gang <Gang.Liu@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/gpio/gpio-mpc8xxx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index 2aa3ca215bd6..d5376aa1c5e1 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -295,7 +295,7 @@ static int mpc8xxx_gpio_irq_map(struct irq_domain *h, unsigned int virq,
mpc8xxx_irq_chip.irq_set_type = mpc8xxx_gc->of_dev_id_data;

irq_set_chip_data(virq, h->host_data);
- irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
+ irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_edge_irq);

return 0;
}
--
2.10.2
\
 
 \ /
  Last update: 2016-11-07 14:25    [W:1.823 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site