lkml.org 
[lkml]   [2016]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/6] ARM: add low level debug uart for rk1108
Date
RK1108 UARTs are Synopsis DesignWare 8250 compatible.
Only with different register addresses.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---

arch/arm/Kconfig.debug | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index d83f7c3..408540f 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -776,6 +776,30 @@ choice
their output to the standard serial port on the RealView
PB1176 platform.

+ config DEBUG_RK1108_UART0
+ bool "Kernel low-level debugging messages via Rockchip RK1108 UART0"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip RK1108 based platforms.
+
+ config DEBUG_RK1108_UART1
+ bool "Kernel low-level debugging messages via Rockchip RK1108 UART1"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip RK1108 based platforms.
+
+ config DEBUG_RK1108_UART2
+ bool "Kernel low-level debugging messages via Rockchip RK1108 UART2"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip RK1108 based platforms.
+
config DEBUG_RK29_UART0
bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
depends on ARCH_ROCKCHIP
@@ -1465,6 +1489,9 @@ config DEBUG_UART_PHYS
default 0x10126000 if DEBUG_RK3X_UART1
default 0x101f1000 if DEBUG_VERSATILE
default 0x101fb000 if DEBUG_NOMADIK_UART
+ default 0x10210000 if DEBUG_RK1108_UART2
+ default 0x10220000 if DEBUG_RK1108_UART1
+ default 0x10230000 if DEBUG_RK1108_UART0
default 0x11002000 if DEBUG_MT8127_UART0
default 0x11006000 if DEBUG_MT6589_UART0
default 0x11009000 if DEBUG_MT8135_UART3
@@ -1563,6 +1590,9 @@ config DEBUG_UART_PHYS

config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
+ default 0xc881f000 if DEBUG_RK1108_UART2
+ default 0xc8821000 if DEBUG_RK1108_UART1
+ default 0xc8912000 if DEBUG_RK1108_UART0
default 0xe0000a00 if DEBUG_NETX_UART
default 0xe0010fe0 if ARCH_RPC
default 0xf0000be0 if ARCH_EBSA110
--
2.7.4

\
 
 \ /
  Last update: 2016-11-03 13:43    [W:0.448 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site