lkml.org 
[lkml]   [2016]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] regulator: core: Allow enable GPIO to be specified using GPIOD
Date
The regulator subsystem has used GPIOs internally for a while, however,
end drivers must still specify their enable GPIO using a GPIO number. This
patch allows the end drivers to specify the enable GPIO using GPIOD
directly.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---

Changes since v1:
- Make a small correction to the error path, where we were calling
desc_to_gpio on something that might not be zero.

Thanks,
Charles

drivers/regulator/core.c | 43 ++++++++++++++++++++++++++--------------
include/linux/regulator/driver.h | 14 ++++++++-----
2 files changed, 37 insertions(+), 20 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index b3417ac..9e8def2 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1929,6 +1929,16 @@ void regulator_bulk_unregister_supply_alias(struct device *dev,
}
EXPORT_SYMBOL_GPL(regulator_bulk_unregister_supply_alias);

+static bool regulator_ena_gpio_valid(const struct regulator_config *config)
+{
+ if (config->ena_gpiod)
+ return true;
+
+ if (config->ena_gpio || config->ena_gpio_initialized)
+ return gpio_is_valid(config->ena_gpio);
+
+ return false;
+}

/* Manage enable GPIO list. Same GPIO pin can be shared among regulators */
static int regulator_ena_gpio_request(struct regulator_dev *rdev,
@@ -1938,7 +1948,10 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev,
struct gpio_desc *gpiod;
int ret;

- gpiod = gpio_to_desc(config->ena_gpio);
+ if (config->ena_gpiod)
+ gpiod = config->ena_gpiod;
+ else
+ gpiod = gpio_to_desc(config->ena_gpio);

list_for_each_entry(pin, &regulator_ena_gpio_list, list) {
if (pin->gpiod == gpiod) {
@@ -1948,16 +1961,20 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev,
}
}

- ret = gpio_request_one(config->ena_gpio,
- GPIOF_DIR_OUT | config->ena_gpio_flags,
- rdev_get_name(rdev));
- if (ret)
- return ret;
-
pin = kzalloc(sizeof(struct regulator_enable_gpio), GFP_KERNEL);
- if (pin == NULL) {
- gpio_free(config->ena_gpio);
+ if (!pin)
return -ENOMEM;
+
+ if (!config->ena_gpiod) {
+ ret = gpio_request_one(config->ena_gpio,
+ GPIOF_DIR_OUT | config->ena_gpio_flags,
+ rdev_get_name(rdev));
+ if (ret) {
+ kfree(pin);
+ rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
+ config->ena_gpio, ret);
+ return ret;
+ }
}

pin->gpiod = gpiod;
@@ -4027,16 +4044,12 @@ regulator_register(const struct regulator_desc *regulator_desc,
goto clean;
}

- if ((config->ena_gpio || config->ena_gpio_initialized) &&
- gpio_is_valid(config->ena_gpio)) {
+ if (regulator_ena_gpio_valid(config)) {
mutex_lock(&regulator_list_mutex);
ret = regulator_ena_gpio_request(rdev, config);
mutex_unlock(&regulator_list_mutex);
- if (ret != 0) {
- rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
- config->ena_gpio, ret);
+ if (ret != 0)
goto clean;
- }
}

/* register with sysfs */
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index dac8e7b1..0a3f3a0 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -367,11 +367,13 @@ struct regulator_desc {
* NULL).
* @regmap: regmap to use for core regmap helpers if dev_get_regmap() is
* insufficient.
- * @ena_gpio_initialized: GPIO controlling regulator enable was properly
- * initialized, meaning that >= 0 is a valid gpio
- * identifier and < 0 is a non existent gpio.
- * @ena_gpio: GPIO controlling regulator enable.
+ * @ena_gpiod: GPIO controlling regulator enable.
* @ena_gpio_invert: Sense for GPIO enable control.
+ * @ena_gpio_initialized: ena_gpio enable was properly initialized,
+ * meaning that >= 0 is a valid gpio identifier
+ * and < 0 is a non existent gpio.
+ * @ena_gpio: GPIO controlling regulator enable, deprecated in favour of
+ * ena_gpiod.
* @ena_gpio_flags: Flags to use when calling gpio_request_one()
*/
struct regulator_config {
@@ -381,9 +383,11 @@ struct regulator_config {
struct device_node *of_node;
struct regmap *regmap;

+ struct gpio_desc *ena_gpiod;
+ unsigned int ena_gpio_invert:1;
+
bool ena_gpio_initialized;
int ena_gpio;
- unsigned int ena_gpio_invert:1;
unsigned int ena_gpio_flags;
};

--
2.1.4
\
 
 \ /
  Last update: 2016-11-29 12:49    [W:0.068 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site