lkml.org 
[lkml]   [2016]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH net v2 1/1] net: macb: fix the RX queue reset in macb_rx()
From
From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Date: Mon, 28 Nov 2016 14:40:55 +0100

> On macb only (not gem), when a RX queue corruption was detected from
> macb_rx(), the RX queue was reset: during this process the RX ring
> buffer descriptor was initialized by macb_init_rx_ring() but we forgot
> to also set bp->rx_tail to 0.
>
> Indeed, when processing the received frames, bp->rx_tail provides the
> macb driver with the index in the RX ring buffer of the next buffer to
> process. So when the whole ring buffer is reset we must also reset
> bp->rx_tail so the driver is synchronized again with the hardware.
>
> Since macb_init_rx_ring() is called from many locations, currently from
> macb_rx() and macb_init_rings(), we'd rather add the "bp->rx_tail = 0;"
> line inside macb_init_rx_ring() than add the very same line after each
> call of this function.
>
> Without this fix, the rx queue is not reset properly to recover from
> queue corruption and connection drop may occur.
>
> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
> Fixes: 9ba723b081a2 ("net: macb: remove BUG_ON() and reset the queue to handle RX errors")
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Applied and queued up for -stable, thanks.

\
 
 \ /
  Last update: 2016-11-30 02:03    [W:0.048 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site