lkml.org 
[lkml]   [2016]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Input: touchscreen: zylonite_wm97xx - change msleep to usleep_range for small msecs
Date
msleep(1~20) may not do what the caller intends, and will often sleep longer.
(~20 ms actual sleep for any value given in the 1~20ms range)
This is not the desired behaviour for many cases like device resume time,
device suspend time, device enable time, retry logic, etc.
Thus, change msleep to usleep_range for precise wakeups.

Signed-off-by: Aniroop Mathur <a.mathur@samsung.com>
---
drivers/input/touchscreen/zylonite-wm97xx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
index e2ccd68..cebd3a8 100644
--- a/drivers/input/touchscreen/zylonite-wm97xx.c
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -81,7 +81,7 @@ static void wm97xx_acc_pen_up(struct wm97xx *wm)
{
int i;

- msleep(1);
+ usleep_range(1000, 1100);

for (i = 0; i < 16; i++)
MODR;
@@ -98,7 +98,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm)
* for samples. The controller can't have a suitably low
* threshold set to use the notifications it gives.
*/
- msleep(1);
+ usleep_range(1000, 1100);

if (tries > 5) {
tries = 0;
--
2.6.2
\
 
 \ /
  Last update: 2016-11-28 19:35    [W:0.050 / U:0.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site