lkml.org 
[lkml]   [2016]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM: dts: mvebu: Fix armada-385-turris-omnia stdout-path
From
Date
Am 27.11.2016 um 22:25 schrieb Uwe Kleine-König:
> On Sun, Nov 27, 2016 at 08:37:24PM +0100, Andreas Färber wrote:
>> Specify the baudrate.
>>
>> Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
>> Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>
> You said with plain &uart0 the kernel uses a wrong baud rate? That's
> strange. For me it works and I think it's the intended behaviour to
> dermine the baud rate setup by the bootloader and use this.

IIRC the 8250 driver defaults to 9600n8 if unspecified.

Kernel tested: 4.9.0-rc2-next-20161028-00010-g4fb44d9-dirty

Maybe you used some console= argument overriding it?

> I'd prefer it this way over hard coding the baud rate.
>
>> arch/arm/boot/dts/armada-385-turris-omnia.dts | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
>> index f53cb8b73610..2eff012287d4 100644
>> --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
>> +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
>> @@ -52,7 +52,7 @@
>> compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
>>
>> chosen {
>> - stdout-path = &uart0;
>> + stdout-path = "serial0:115200n8";
>> };
>>
>> memory {
>
> This has the downside to depend on the alias. Not sure this is
> considered modern. An alternative would be:
>
> stdout-path = "/soc/internal-regs/serial@12000:115200n8";

Please don't unroll the path I'm trying to abstract elsewhere.

Like I said, the "serialX:115200n8" syntax is what all other Armada 38x
boards use:

git grep stdout-path -- arch/arm/boot/dts/ | grep armada-38
arch/arm/boot/dts/armada-385-db-ap.dts: stdout-path = "serial1:115200n8";
arch/arm/boot/dts/armada-385-linksys.dtsi: stdout-path =
"serial0:115200n8";
arch/arm/boot/dts/armada-388-clearfog.dts: stdout-path =
"serial0:115200n8";
arch/arm/boot/dts/armada-388-db.dts: stdout-path = "serial0:115200n8";
arch/arm/boot/dts/armada-388-gp.dts: stdout-path = "serial0:115200n8";
arch/arm/boot/dts/armada-388-rd.dts: stdout-path = "serial0:115200n8";

The alias is needed to reliably determine the tty device number and is
set "globally" in armada-38x.dtsi, so why is it a problem to rely on?

Regards,
Andreas

>
> (maybe there even exists syntactic sugar to express this using &uart0?)

--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)

\
 
 \ /
  Last update: 2016-11-27 23:15    [W:0.037 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site