lkml.org 
[lkml]   [2016]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Synopsys Ethernet QoS Driver
From
Date
On 11/23/2016 12:43 PM, Joao Pinto wrote:
>> > Rabin Vincent can review and test that the port works properly on our Artpec-chips that use dwc_eth_qos.c today.
>> >
>> > The main porting step is to implement the device tree binding in bindings/net/snps,dwc-qos-ethernet.txt. Also our chip has a strict requirement that the phy is enabled when the SWR reset bit is set (it needs a tx clock to complete the reset).
>> >
>> > - Lars
> Ok, I will do the task.
>
> @Peppe: Agree with the plan?

Agree

peppe

\
 
 \ /
  Last update: 2016-11-25 11:07    [W:0.100 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site