lkml.org 
[lkml]   [2016]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5] [media] vb2: Add support for capture_dma_bidirectional queue flag
Em Tue, 22 Nov 2016 14:30:47 +0100
Thierry Escande <thierry.escande@collabora.com> escreveu:

> Hi Mauro,
>
> On 18/11/2016 19:59, Mauro Carvalho Chehab wrote:
> > Em Tue, 25 Oct 2016 10:22:29 +0200
> > Thierry Escande <thierry.escande@collabora.com> escreveu:
> >
> >> From: Pawel Osciak <posciak@chromium.org>
> >>
> >> When this flag is set for CAPTURE queues by the driver on calling
> >> vb2_queue_init(), it forces the buffers on the queue to be
> >> allocated/mapped with DMA_BIDIRECTIONAL direction flag instead of
> >> DMA_FROM_DEVICE. This allows the device not only to write to the
> >> buffers, but also read out from them. This may be useful e.g. for codec
> >> hardware which may be using CAPTURE buffers as reference to decode
> >> other buffers.
> >>
> >> This flag is ignored for OUTPUT queues as we don't want to allow HW to
> >> be able to write to OUTPUT buffers.
> >>
> >> This patch introduces 2 macros:
> >> VB2_DMA_DIR(q) returns the corresponding dma_dir for the passed queue
> >> type, tanking care of the capture_dma_birectional flag.
> >>
> >> VB2_DMA_DIR_CAPTURE(d) is a test macro returning true if the passed DMA
> >> direction refers to a capture buffer. This test is used to map virtual
> >> addresses for writing and to mark pages as dirty.
> >
> > Why to add it? There's no other patch on this series with would
> > justify its needs...
>
> It is used by a Rockchip vpu driver which is only in the chromeos public
> tree for now and will be upstreamed soon.

OK!

Please send it together with the Rockchip VPU driver, as I don't merge
API changes without upstream drivers needing them. One of the reasons
is that reviewing API patches require real code using them.

For now, I'll tag this patch as RFC. I'll review it by the time you
sent it together with the drivers.

>
> Regards,
> Thierry
>
> >>
> >> Signed-off-by: Pawel Osciak <posciak@chromium.org>
> >> Tested-by: Pawel Osciak <posciak@chromium.org>
> >> Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
> >> ---
> >>
> >> Changes in v2:
> >> - Renamed use_dma_bidirectional field as capture_dma_bidirectional
> >> - Added a VB2_DMA_DIR() macro
> >>
> >> Changes in v3:
> >> - Get rid of dma_dir field and therefore squashed the previous patch
> >>
> >> Changes in v4:
> >> - Fixed typos in include/media/videobuf2-core.h
> >> - Added VB2_DMA_DIR_CAPTURE() test macro
> >>
> >> Changes in v5:
> >> - Use is_output queue field in VB2_DMA_DIR() macro
> >>
> >> drivers/media/v4l2-core/videobuf2-core.c | 9 +++------
> >> drivers/media/v4l2-core/videobuf2-dma-contig.c | 2 +-
> >> drivers/media/v4l2-core/videobuf2-dma-sg.c | 5 +++--
> >> drivers/media/v4l2-core/videobuf2-vmalloc.c | 4 ++--
> >> include/media/videobuf2-core.h | 23 +++++++++++++++++++++++
> >> 5 files changed, 32 insertions(+), 11 deletions(-)
> >>
> >> diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c
> >> index 21900202..22d6105 100644
> >> --- a/drivers/media/v4l2-core/videobuf2-core.c
> >> +++ b/drivers/media/v4l2-core/videobuf2-core.c
> >> @@ -194,8 +194,7 @@ static void __enqueue_in_driver(struct vb2_buffer *vb);
> >> static int __vb2_buf_mem_alloc(struct vb2_buffer *vb)
> >> {
> >> struct vb2_queue *q = vb->vb2_queue;
> >> - enum dma_data_direction dma_dir =
> >> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
> >> + enum dma_data_direction dma_dir = VB2_DMA_DIR(q);
> >> void *mem_priv;
> >> int plane;
> >> int ret = -ENOMEM;
> >> @@ -978,8 +977,7 @@ static int __qbuf_userptr(struct vb2_buffer *vb, const void *pb)
> >> void *mem_priv;
> >> unsigned int plane;
> >> int ret = 0;
> >> - enum dma_data_direction dma_dir =
> >> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
> >> + enum dma_data_direction dma_dir = VB2_DMA_DIR(q);
> >> bool reacquired = vb->planes[0].mem_priv == NULL;
> >>
> >> memset(planes, 0, sizeof(planes[0]) * vb->num_planes);
> >> @@ -1096,8 +1094,7 @@ static int __qbuf_dmabuf(struct vb2_buffer *vb, const void *pb)
> >> void *mem_priv;
> >> unsigned int plane;
> >> int ret = 0;
> >> - enum dma_data_direction dma_dir =
> >> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
> >> + enum dma_data_direction dma_dir = VB2_DMA_DIR(q);
> >> bool reacquired = vb->planes[0].mem_priv == NULL;
> >>
> >> memset(planes, 0, sizeof(planes[0]) * vb->num_planes);
> >> diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c
> >> index fb6a177..a44e383 100644
> >> --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c
> >> +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c
> >> @@ -507,7 +507,7 @@ static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr,
> >> buf->dma_dir = dma_dir;
> >>
> >> offset = vaddr & ~PAGE_MASK;
> >> - vec = vb2_create_framevec(vaddr, size, dma_dir == DMA_FROM_DEVICE);
> >> + vec = vb2_create_framevec(vaddr, size, VB2_DMA_DIR_CAPTURE(dma_dir));
> >> if (IS_ERR(vec)) {
> >> ret = PTR_ERR(vec);
> >> goto fail_buf;
> >> diff --git a/drivers/media/v4l2-core/videobuf2-dma-sg.c b/drivers/media/v4l2-core/videobuf2-dma-sg.c
> >> index ecff8f49..51c98f6 100644
> >> --- a/drivers/media/v4l2-core/videobuf2-dma-sg.c
> >> +++ b/drivers/media/v4l2-core/videobuf2-dma-sg.c
> >> @@ -238,7 +238,8 @@ static void *vb2_dma_sg_get_userptr(struct device *dev, unsigned long vaddr,
> >> buf->offset = vaddr & ~PAGE_MASK;
> >> buf->size = size;
> >> buf->dma_sgt = &buf->sg_table;
> >> - vec = vb2_create_framevec(vaddr, size, buf->dma_dir == DMA_FROM_DEVICE);
> >> + vec = vb2_create_framevec(vaddr, size,
> >> + VB2_DMA_DIR_CAPTURE(buf->dma_dir));
> >> if (IS_ERR(vec))
> >> goto userptr_fail_pfnvec;
> >> buf->vec = vec;
> >> @@ -291,7 +292,7 @@ static void vb2_dma_sg_put_userptr(void *buf_priv)
> >> vm_unmap_ram(buf->vaddr, buf->num_pages);
> >> sg_free_table(buf->dma_sgt);
> >> while (--i >= 0) {
> >> - if (buf->dma_dir == DMA_FROM_DEVICE)
> >> + if (VB2_DMA_DIR_CAPTURE(buf->dma_dir))
> >> set_page_dirty_lock(buf->pages[i]);
> >> }
> >> vb2_destroy_framevec(buf->vec);
> >> diff --git a/drivers/media/v4l2-core/videobuf2-vmalloc.c b/drivers/media/v4l2-core/videobuf2-vmalloc.c
> >> index ab3227b..76649bd 100644
> >> --- a/drivers/media/v4l2-core/videobuf2-vmalloc.c
> >> +++ b/drivers/media/v4l2-core/videobuf2-vmalloc.c
> >> @@ -86,7 +86,7 @@ static void *vb2_vmalloc_get_userptr(struct device *dev, unsigned long vaddr,
> >> buf->dma_dir = dma_dir;
> >> offset = vaddr & ~PAGE_MASK;
> >> buf->size = size;
> >> - vec = vb2_create_framevec(vaddr, size, dma_dir == DMA_FROM_DEVICE);
> >> + vec = vb2_create_framevec(vaddr, size, VB2_DMA_DIR_CAPTURE(dma_dir));
> >> if (IS_ERR(vec)) {
> >> ret = PTR_ERR(vec);
> >> goto fail_pfnvec_create;
> >> @@ -136,7 +136,7 @@ static void vb2_vmalloc_put_userptr(void *buf_priv)
> >> pages = frame_vector_pages(buf->vec);
> >> if (vaddr)
> >> vm_unmap_ram((void *)vaddr, n_pages);
> >> - if (buf->dma_dir == DMA_FROM_DEVICE)
> >> + if (VB2_DMA_DIR_CAPTURE(buf->dma_dir))
> >> for (i = 0; i < n_pages; i++)
> >> set_page_dirty_lock(pages[i]);
> >> } else {
> >> diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
> >> index ac5898a..11d2e51 100644
> >> --- a/include/media/videobuf2-core.h
> >> +++ b/include/media/videobuf2-core.h
> >> @@ -433,6 +433,9 @@ struct vb2_buf_ops {
> >> * @quirk_poll_must_check_waiting_for_buffers: Return POLLERR at poll when QBUF
> >> * has not been called. This is a vb1 idiom that has been adopted
> >> * also by vb2.
> >> + * @capture_dma_bidirectional: use DMA_BIDIRECTIONAL for CAPTURE buffers; this
> >> + * allows HW to read from the CAPTURE buffers in
> >> + * addition to writing; ignored for OUTPUT queues.
> >> * @lock: pointer to a mutex that protects the vb2_queue struct. The
> >> * driver can set this to a mutex to let the v4l2 core serialize
> >> * the queuing ioctls. If the driver wants to handle locking
> >> @@ -499,6 +502,7 @@ struct vb2_queue {
> >> unsigned fileio_write_immediately:1;
> >> unsigned allow_zero_bytesused:1;
> >> unsigned quirk_poll_must_check_waiting_for_buffers:1;
> >> + unsigned capture_dma_bidirectional:1;
> >>
> >> struct mutex *lock;
> >> void *owner;
> >> @@ -554,6 +558,25 @@ struct vb2_queue {
> >> #endif
> >> };
> >>
> >> +/*
> >> + * Returns the corresponding DMA direction given the vb2_queue type (capture or
> >> + * output). Returns DMA_BIDIRECTIONAL for capture buffers if the vb2_queue field
> >> + * capture_dma_bidirectional is set by the driver.
> >> + */
> >> +#define VB2_DMA_DIR(q) ((q)->is_output ? DMA_TO_DEVICE \
> >> + : (q)->capture_dma_bidirectional \
> >> + ? DMA_BIDIRECTIONAL \
> >> + : DMA_FROM_DEVICE)
> >> +
> >> +/*
> >> + * Returns true if the DMA direction passed as parameter refers to a capture
> >> + * buffer as capture buffers allow both FROM_DEVICE and BIDIRECTIONAL DMA
> >> + * direction. This test is used to map virtual addresses for writing and to mark
> >> + * pages as dirty.
> >> + */
> >> +#define VB2_DMA_DIR_CAPTURE(d) \
> >> + ((d) == DMA_FROM_DEVICE || (d) == DMA_BIDIRECTIONAL)
> >> +
> >> /**
> >> * vb2_plane_vaddr() - Return a kernel virtual address of a given plane
> >> * @vb: vb2_buffer to which the plane in question belongs to
> >
> >
> > Thanks,
> > Mauro
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html


Thanks,
Mauro

\
 
 \ /
  Last update: 2016-11-23 23:01    [W:0.082 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site