lkml.org 
[lkml]   [2016]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] ARM: dts: da850: add the mstpri and ddrctl nodes
From
Date
On 11/23/2016 04:27 AM, Bartosz Golaszewski wrote:
> 2016-11-22 23:23 GMT+01:00 David Lechner <david@lechnology.com>:
>> On 11/15/2016 05:00 AM, Bartosz Golaszewski wrote:
>>>
>>> Add the nodes for the MSTPRI configuration and DDR2/mDDR memory
>>> controller drivers to da850.dtsi.
>>>
>>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>> ---
>>> v1 -> v2:
>>> - moved the priority controller node above the cfgchip node
>>> - renamed added nodes to better reflect their purpose
>>>
>>> arch/arm/boot/dts/da850.dtsi | 8 ++++++++
>>> 1 file changed, 8 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
>>> index 1bb1f6d..412eec6 100644
>>> --- a/arch/arm/boot/dts/da850.dtsi
>>> +++ b/arch/arm/boot/dts/da850.dtsi
>>> @@ -210,6 +210,10 @@
>>> };
>>>
>>> };
>>> + prictrl: priority-controller@14110 {
>>> + compatible = "ti,da850-mstpri";
>>> + reg = <0x14110 0x0c>;
>>
>>
>> I think we should add status = "disabled"; here and let boards opt in.
>>
>>> + };
>>> cfgchip: chip-controller@1417c {
>>> compatible = "ti,da830-cfgchip", "syscon",
>>> "simple-mfd";
>>> reg = <0x1417c 0x14>;
>>> @@ -451,4 +455,8 @@
>>> 1 0 0x68000000 0x00008000>;
>>> status = "disabled";
>>> };
>>> + memctrl: memory-controller@b0000000 {
>>> + compatible = "ti,da850-ddr-controller";
>>> + reg = <0xb0000000 0xe8>;
>>
>>
>> same here. status = "disabled";
>>
>>> + };
>>> };
>>>
>
> Hi David,
>
> I did that initially[1][2] and it was rejected by Kevin[3] and Laurent[4].
>
> FYI this patch has already been queued by Sekhar.

Thanks. I did not see those threads.

FYI to maintainers, having these enabled by default causes error
messages in the kernel log for other boards that are not supported by
the drivers. Since there is only one board that is supported and soon to
be 2 that are not, I would rather have this disabled by default to avoid
the error messages.

>
> Best regards,
> Bartosz Golaszewski
>
> [1] https://www.spinics.net/lists/arm-kernel/msg539638.html
> [2] http://www.spinics.net/lists/devicetree/msg148575.html
> [3] http://www.spinics.net/lists/devicetree/msg148667.html
> [4] http://www.spinics.net/lists/devicetree/msg148655.html
>

\
 
 \ /
  Last update: 2016-11-23 17:21    [W:0.054 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site